GMEG1132     32ABC-RN .32 ABC BB Rmt Ndl Vlv w/Mfflr 

TECH NOTES

This is a .32 2-Stroke Airplane ABC Engine w/ Remote Needle Valve from GMS.

FEATURES Low speed needle-equipped carburetor with High Speed Needle Valve
mounted on the backplate to reduce chance of injury from spinning
propeller
Aluminum Brass Chrome piston/sleeve construction
Adjustable exhaust outlet on muffler allows 360° rotation of
muffler tip
Gold anodized heatsink head.
Ball bearing-supported crankshaft
One-piece crankcase with a bead-blasted finish
2 year warranty on all GMS engines

INCLUDES: One .32 cid (5.20cc) airplane engine
One bolt-through muffler
One carburetor
One muffler gasket
One glow plug
Two allen key tools
Two muffler screws
One manual and parts list

REQUIRES: Attaching high speed remote needle valve and muffler.
5-15% airplane nitro fuel.
8x6 propeller for break-in

SPECS:    Displacement: .32 cid (5.20cc)
Bore:          19.8mm
Stroke:        17mm
Output:        1.2 BHP at 18,000 RPM
Practical range: 2,000 - 20,000 RPM
Weight:        10.76oz (305g) with muffler

Center distance width across mounting holes: 1.5"  (38mm)
Distance between mounting holes same side:   0.59" (15mm)
Length from front of crankcase to backplate screws: 2.7" (69mm)
Width across mounting flanges: 1.7" (45mm)
Total height of engine: 3.02" (76.8mm)
Length from center of head to front of crankcase: 1.9" (48mm)
Widest width of crankcase neglecting mounting flanges: 1.2" (30mm)
Length from front of crankcase to center distance of front
mounting hole: 1.5" (39mm)
Height from crankshaft center to top of head: 2.4" (61mm)
Crankshaft thread size: 1/4-28

COMMENTS: Recommended propeller sizes: 8x6-9x6
For the GMS .32 engine with front mounted needle, use GMEG1032
All GMS engines use the same owner's manual

ACCESSORIES

THIS IS THE GMS .32 REMOTE NEEDLE VALVE AIRPLANE ENGINE.
FEATURES: 2 NEEDLE CARB FOR SEPARATE HIGH AND LOW SETTINGS, HIGH SPEED NEEDLE
HAS HOLE FOR MUSIC WIRE EXTENSIONS, BALL BEARING SUPPORTED CRANKSHAFT, GLOW
PLUG, ROTATABLE MUFFLER W/PRESSURE TAP & GASKET
REQUIRES, 10-15% FUEL, BREAK-IN PROP, FUEL FILTER, FUEL TUBING, GLOW STARTER