GMEG1161   GMS   .61 BB Ringed Remote Needle Valve w/Muffler

TECH NOTES
    This is a .61 2-Stroke Airplane Ringed Engine with Remote Needle Valve
                                from GMS.

FEATURES: Ball bearing-supported crankshaft
          Remote mount high speed needle valve mounts to rear cover plate to
            prevent injury from spinning propellers
          Low speed needle-equipped carburetor
          Ringed piston
          Adjustable exhaust outlet on muffler allows 360 degrees rotation of
            muffler tip
          Gold anodized heat sink head
          One-piece crankcase with a bead-blasted finish
          2 year warranty on all GMS engines

INCLUDES: One .61 ringed airplane engine
          One bolt-through muffler
          One carburetor
          One remote high speed needle valve with mounting bracket
          One glow plug
          Two allen key tools
          Two muffler screws
          One manual and parts list

REQUIRES: Attaching high speed remote needle valve and muffler.
          10-15% nitro airplane fuel.
          11x7 break-in propeller

SPECS:    Displacement: .61 cid (9.97 cc)
          Bore: 23.8mm
          Stroke: 22.4mm
          Output: 2 BHP at 15,000 RPM
          Practical range: 2,000 - 13,000 RPM (with 11x7 prop)
          Weight: 26oz (737g) with muffler

          Center distance width across mounting holes: 2.0" (52mm)
          Center distance length of mounting holes on same side: 1" (25mm)
          Length from front of crankcase to backplate screws: 4.0" (102mm)
          Width across mounting flanges: 2.4" (61mm)
          Total height of engine: 4" (101mm)
          Length from center of head to front of crankcase: 2.9" (73.5mm)
          Widest width of crankcase neglecting mounting flanges: 1.7" (43mm)
          Length from front of crankcase to center distance of front
            mounting hole: 2.4" (61mm)
          Height from crankshaft center to top of head: 3.1" (79.5mm)
          Crankshaft thread size: 5/16-24

COMMENTS: Use the following size propellers depending on your type of model
          Sport Model: 11x8
          Racing Model: 11x7
          Scale Model: 12x6

          For the GMS .61 engine with front-mounted needle, use GMEG1061.
          All GMS engines use the same owner's manual

                                                                   
ACCESSORIES
          THIS IS THE GMS .61 REMOTE NEEDLE VALVE AIRPLANE ENGINE.
FEATURES: 2 NEEDLE CARB FOR SEPARATE HIGH AND LOW SETTINGS, HIGH SPEED NEEDLE
 HAS HOLE FOR MUSIC WIRE EXTENSIONS, BALL BEARING SUPPORTED CRANKSHAFT, GLOW
 PLUG, ROTATABLE MUFFLER W/PRESSURE TAP & GASKET, RINGED PISTON
REQUIRES, 10-15% FUEL, BREAK-IN PROP, FUEL FILTER, FUEL TUBING, GLOW STARTER