GPMP0815   LiPo 910mAh 11.1V 15C Discharge w/SafeCharge

TECH NOTES
       This is the Great Planes ElectriFly Lithium Polymer 11.1V 910mAh
                       3-Cells In Series Battery Pack.
       Ideal for larger Park Flyers, electric airplanes up to Speed 400
                          and small electric helis.
             These batteries must be Charged ONLY with a charger
         designed to Charge Lithium Polymer batteries which can apply
       the "Constant Current/Constant Voltage" (CC/CV) charge technique.

FEATURES: Next generation replacement for NiCd, NiMH, and Lithium Ion cells
          SafeCharge circuitry prevents individual cells from overcharging.
            If any cell reaches 4.20V, the SafeCharge circuit automatically
            stops the Charge process entirely.
          Unique power technology offers high energy density, low weight, long
            life, safe operation, and environmentally friendly chemistry.

INCLUDES: One ElectriFly Lithium Polymer 11.1V 910mAh Battery Pack with Red
            2-pin Charge Plug with 24 gauge wire, and 16 gauge Discharge wire
            with Dean's Ultra Female Plug

REQUIRES: Charger such as the Great Planes Triton (GPMM3150), Hobbico Accu-
            Cycle Elite (HCAP0280), Hobbico Quick Field Charger MkII HCAP0290
            or Great Planes PolyCharge Lithium Polymer DC Charger (GPMM3010)

          If a Charge Lead is needed, use the Great Planes 2 Pin/Banana Plug
            Charge Adapter (GPMM3105). It is directly compatible with the
            Charge Plug on the battery

SPECS:    Dimensions: 0.79" x 1.34" x 2.44" (20mm x 34mm x 62mm)
          Weight: 2.78oz (79g)
          Number of Cells: 3, wired in Series
          Capacity: 910mAh
          Volts: 11.1V
          Minimum Discharge Voltage: 7.5V
          Maximum Charge Voltage: 12.6V
          Maximum Currents:
            Charge, 910mA
            Discharge, 13.6A (15C)

COMMENTS: NEVER Charge Lithium Polymer batteries with a charger designed for
            NiCd, NiMH, or any other type of battery chemistry. Use ONLY
            the chargers listed under REQUIRES or equivalent substitutes.

          Do not allow LiPo cells to overheat at any time. Cells which reach
            greater than 140°F (60°C) will usually become damaged and
            could catch fire.
          Do not Charge or Discharge LiPo cells on or near combustible
            materials including paper, plastic, carpets, vinyl, leather, wood,
            inside an R/C model or full size automobile.
          Do not expose LiPo cells to water or moisture at any time.
          Do not store batteries near an open flame or heater.
          Do not assemble LiPo cells or pre-assembled packs together with
            other LiPo cells or packs.
          Do not leave a LiPo battery unattended during Charging or Discharging
          Always store LiPo batteries in a secure location away from children
          Always remove a LiPo battery if model is involved in any kind of
            crash. Carefully inspect the battery and connectors for even the
            smallest damage. CAUTION: cells may be hot! Do not allow the
            electrolyte to get into eyes or on skin. Wash affected areas
            immediately if they come into contact with electrolyte.
          Do not alter or modify connectors or wires of a Lithium battery pack.