GPMP0822   Li-Po 1250mAh 7.4V 2-Series Pack 15C Discharge

TECH NOTES
      This is the Great Planes ElectriFly Lithium Polymer 7.4V 1250mAh
                       2-Cells In Series Battery Pack.
             Ideal for flat foam 3D aerobatic airplanes and
                          medium size park flyers.

             These batteries must be charged ONLY with a charger
         designed to charge Lithium Polymer batteries which can apply
       the "constant current/constant voltage" (cc/cv) charge technique.


FEATURES: Next generation replacement for NiCd, NiMH, and Lithium Ion cells
          Safe Charge circuitry prevents individual cells from overcharging,
            if any cell in the pack reaches 4.20V, the Safe Charge circuit will
            automatically stop the charge process entirely
          Unique power technology offers high energy density, low weight, long
            life, safe operation, and environmentally friendly chemistry

INCLUDES: One ElectriFly Lithium Polymer 7.4V 1250mAh Battery Pack with red
              connector

REQUIRES: Charger such as the Great Planes Triton (GPMM3150), Hobbico Accu
            Cycle Elite (HCAP0280), Hobbico Quick Field Charger MKII (HCAP0290)
            or the Great Planes PolyCharge Lithium Polymer DC charger GPMM3010

          If a charge lead is needed, use the Great Planes 2 Pin/Banana Plug
            Charge Adapter (GPMM3105), it is directly compatible with the
            charge plug on the battery

SPECS:    Dimensions: 3.14" x 1.6" x .51" (80mm x 42mm x13mm)
          Weight: 2.8oz (80g)
          Number of Cells: 2, wired in series
          Capacity: 1250mAh
          Volts: 7.4V
          Maximum Currents:
            Charge, 1.25A Maximum
            Discharge, 18.75A
          Maximum Charge Voltage: 8.40V
          Maximum Discharge Voltage: 5.4-5.6V

COMMENTS: NEVER charge Lithium Polymer batteries with a charger designed for
            NiCd, NiMH, or any other type of battery chemistry. Use ONLY
            the chargers listed under REQUIRES or equivalent substitutes.

          Do not allow Li-Po cells to overheat at any time. Cells which reach
            greater than 140° Fahrenheit (60C) will usually become damaged and
            could catch fire.
          Do not charge or discharge Li-Po cells on or near combustible
            materials including paper, plastic, carpets, vinyl, leather, wood,
            inside an R/C model or full size automobile.
          Do not expose Li-Po cells to water or moisture at any time.
          Do not store batteries near an open flame or heater.
          Do not assemble Li-Po cells or pre-assembled packs together with
            other Li-Po cells or packs.
          Do not allow a Li-Po battery to be left unattended during charging or
            discharging.
          Always store Li-Po batteries in a secure location away from children
          Always remove a Li-Po battery if model is involved in any kind of
            crash. Carefully inspect the battery and connectors for even the
            smallest damage. CAUTION: cells may be hot! Do not allow the
            electrolyte to get into eyes or on skin. Wash affected areas
            immediately if they come into contact with electrolyte.
          Do not alter or modify connectors or wires of a lithium battery pack.
            This could result in damage to battery pack or other equipment and
            will void the warranty.