GPMP0823   Li-Po 1250mAh 11.1V 3-Series Pack 15C Discharge

TECH NOTES
       This is the Great Planes ElectriFly Lithium Polymer 11.1V 1250mAh
                       3-Cells In Series Battery Pack.
              Ideal for Speed 400 up to Speed 600 size models.
             These batteries must be charged ONLY with a charger
         designed to charge Lithium Polymer batteries which can apply
       the "constant current/constant voltage" (cc/cv) charge technique.

FEATURES: Next generation replacement for NiCd, NiMH, and Lithium Ion cells
          SafeCharge circuitry prevents individual cells from overcharging.
            If any cell in the pack reaches 4.20V, the SafeCharge circuit will
            automatically stop the charge process entirely
          Unique power technology offers high energy density, low weight, long
            life, safe operation, and environmentally friendly chemistry

INCLUDES: One ElectriFly Lithium Polymer 11.1V 1250mAh Battery Pack with red
            2-pin flat charge plug with 24 gauge wire, and L-shaped connector
            with 16 gauge wire discharge lead

REQUIRES: Charger such as the Great Planes Triton (GPMM3150), Hobbico Accu
            Cycle Elite (HCAP0280), Hobbico Quick Field Charger MKII (HCAP0290)
            or the Great Planes PolyCharge Lithium Polymer DC charger GPMM3010

          If a charge lead is needed, use the Great Planes 2 Pin/Banana Plug
            Charge Adapter (GPMM3105). It is directly compatible with the
            charge plug on the battery

SPECS:    Dimensions: 3.03 x 1.77 x 0.67 in. (77 x 45 x 17mm)
          Weight: 3.63 oz (103g)
          Number of Cells: 3, wired in series
          Capacity: 1250mAh
          Volts: 11.1
          Minimum Discharge Voltage: 7.5V
          Maximum Charge Voltage: 12.6V
          Maximum Currents:
            Charge, 1.25A
            Discharge, 18.75A

COMMENTS: NEVER charge Lithium Polymer batteries with a charger designed for
            NiCd, NiMH, or any other type of battery chemistry. Use ONLY
            the chargers listed under REQUIRES or equivalent substitutes.

          Do not allow Li-Po cells to overheat at any time. Cells which reach
            greater than 140° Fahrenheit (60C) will usually become damaged and
            could catch fire.
          Do not charge or discharge Li-Po cells on or near combustible
            materials including paper, plastic, carpets, vinyl, leather, wood,
            inside an R/C model or full size automobile.
          Do not expose Li-Po cells to water or moisture at any time.
          Do not store batteries near an open flame or heater.
          Do not assemble Li-Po cells or pre-assembled packs together with
            other Li-Po cells or packs.
         Do not leave a Li-Po battery unattended during charging or discharging
          Always store Li-Po batteries in a secure location away from children
          Always remove a Li-Po battery if model is involved in any kind of
            crash. Carefully inspect the battery and connectors for even the
            smallest damage. CAUTION: cells may be hot! Do not allow the
            electrolyte to get into eyes or on skin. Wash affected areas
            immediately if they come into contact with electrolyte.
          Do not alter or modify connectors or wires of a lithium battery pack.