GPMA1271   Great Planes   Giant U-Can-Do 3D 1.20-1.60 ARF 

TECH NOTES
  This is the radio controlled, glow or gasoline powered, almost-ready-to-fly,
               Great Planes Giant U-Can-Do 3D Aerobatic Airplane.
                  For Intermediate to Advanced Modeler/Flyers.
                                 IMAA legal.

** Additional Technical Information Will Be Added When It Becomes Available. **

FEATURES: Construction: All balsa, plywood
          Wings: Two piece all wood, with aluminum joiner tube
          Covering: Top Flite MonoKote, color scheme is Jet White and Pink with
            Sky Blue and Purple accents
          Radio Compartment: Plywood reinforced, accessible under canopy
          Cowling: Pre-painted, fiberglass
          Wheel Pants: Pre-painted, fiberglass
          Wheels: Two   " (  mm) foam, one   " (  mm) tailwheel
          Canopy: Single, clear
          Landing Gear: Pre-formed aluminum 0.16" (4mm) thick with   " (  mm)
            tailwheel wire
          Aileron Control: Dual servo
          Elevator Control: Dual servo
          Flap Control: Dual servo
          Engine Mount: Composite, adjustable
          Building Time: Ready to fly in only 6-8 hours.

          Warranty Period: Great Planes warrants this kit to be free from
            defects in both material and workmanship at the date of purchase.
            This warranty does not cover any component parts damaged by use or
            modification.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
            pre-bent   /  " main landing gear,   " tailwheel wire,
               " main wheels,   " tailwheel,  engine mount,
               oz fuel tank,    " spinner, aluminum wing joiner
            hardware package and photo-illustrated instructions.

REQUIRES: Engine: 1.20-1.60 cu in (20-26cc) 2 or 4 stroke glow OR
                  2.0-2.5 cu in (32.5-41cc) gasoline

          Muffler:
          Radio: at least 4 channel, 8 channel radio with digital servos is
            highly recommended
          Servos: 8 standard size;
            Ailerons: Two 50+oz/in ball bearing (FUTM0075)
            Flaps: Two 50+oz/in ball bearing (FUTM0075)
            Rudder: One 90 oz/in high torque (FUTM0015)
            Elevator: Two 90 oz/in ball bearing (FUTM0015)
            Throttle: One, standard torque (HCAM0149)
          20" Servo Extension: Two, for ailerons (FUTM4147)
          8" Servo Extension: Two each for ailerons and flaps (FUTM4140)
          40" Servo Extension: One for rudder (FUTM4148)
            Note: if using computerized radio with ailevator programming
            two 40" extensions are needed, if using non-computerized radio,
            servo reversing harness (FUTM4150) and 20" extension (FUTM4147) are
            required.
          Misc. Items: Glow plug, 1/2" foam rubber padding, medium fuel tubing,
            fuel filter, propeller (IMPORTANT-do not use a propeller with a
            pitch higher than 8), building and field equipment

SPECS:    Wingspan:  82" (2085mm)
          Wing Area:  1772 sq in (114sq dm)
          Weight: 12.5 - 13.5 lb (5.6 - 6.1 kg)
          Wing Loading: 16.1 - 17.4 oz/sq ft (49 - 53 g/sq dm)
          Length:  84" (2135mm)
          Airfoil:                     , mid-wing placement
          Center of Gravity: 6-1/4" (160mm) Back from the wing's leading edge
          Control Throws-          High Rate (3D)        Low Rate
            Elevator: Up & Down    5" (130mm)            1-3/4" (45mm)
            Rudder: Right to Left  6 " (150mm)           4" (100mm)
            Ailerons: Up & Down    2-3/4" (70mm)         1-1/4" (32mm)
            Flaps:                 4" (100mm) full       2-3/4" (70mm) half

COMMENTS: Following are the Top Flite MonoKote colors used on this model and
            order numbers for 6ft rolls;
            Jet White (TOPQ0204)       Sky Blue (TOPQ0206)
            Medium Purple (TOPQ0225)   Pink (TOPQ0205)