GPMA1360    Seawind Amphibian .60 ARF

TECH NOTES
       This is the radio controlled, glow powered, almost ready to fly
                     Great Planes Seawind .60 Airplane.
                For Intermediate to Advanced Modeler/Flyers.

FEATURES: Construction: Fiberglass fuselage with balsa and plywood wings and
            tail section
          Wings: Plug-in installation for easy transportation, also has
            fiberglass wing floats to support the model while in water,
            aluminum wing joiner
          Fuselage: Constructed of fiberglass with self draining auto bailer
            that drains water out of rear of plane
          Covering: Covered in Top Flite MonoKote in White (TOPQ0204)
          Radio Compartment: Plywood reinforced, easily accessible under wing
          Cowling: Pre-painted fiberglass
          Wheel Pants: Pre-painted fiberglass
          Hull: Constructed of fiberglass, shaped to make airplane come up on
            the "step" quickly quickly for fast take-offs
          Landing Gear: Fixed pre-bent, 0.16" (4mm) thick wire for main and
            nose gear, see COMMENTS
          Wheels: Three foam 3" (76mm) diameter
          Aileron Control: Dual servo
          Spinner: Aluminum, 3 blade, 2.5" (64mm) diameter
          Fuel Tank: 14.2oz (420cc)
          Foam Stand: Holds model during construction and starting engine, also
            prevents damage to water rudder when model is sitting on ground
          Hardware: Full set included
          Building Time: Ready to fly in 15-20 hours
          Motor Mount: Adjustable, composite construction
          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit to be free from defects in both materials and workmanship at
            the date of purchase.

INCLUDES: Pre-built fuselage, wing and tail sections, pushrods, three 3" (76mm)
            diameter wheels, prebent wire for landing gear, 2.5" (64mm)
            diameter aluminum spinner, composite engine mount, 14.2oz (420cc)
            fuel tank,  foam stand, hardware package, metal water rudder and
            photo-illustrated instructions

REQUIRES: Engine: .60 cu in (10cc) 2-stroke
            OR .70-.91 cu in (11.5-15cc) 4-stroke
          Muffler: Stock muffler supplied with engine can be used, engine
            mounts inverted
          Radio: 5-7 channel
          Micro Servos with Metal Gears: Three for rudder throttle and elevator
          Standard Ball Bearing Servos: Four, two for ailerons and two for
            flaps
          12" (300mm) Servo Extension: One
          36" (910mm) Servo Extension: Seven
          Y-Harness: Two for aileron servos
          Misc. Items: Fuel tubing, fuel filter, propeller, building and field
            equipment

SPECS:    Wingspan:     71" (1805mm)
          Wing Area:  676sq in (43.6 sq dm)
          Weight:       10.25 - 12.25lb (4620 - 5555g)
          Wing Loading: 35 - 41 oz/sq ft (106-127 g/sqdm)
          Length:       56" (1410mm)
          Airfoil: Flat bottom
          Center of Gravity: 1-1/32" (26mm) Back from the wing's leading edge.
            This aircraft does not have a CG range, do not move the CG forward
            or aft of the above figure.
          Control Throws-           Low Rate        High Rate
            Ailerons: Up & Down    3/8"  (10mm)    1/2"  (13mm)
            Elevator: Up & Down    7/16" (11mm)    5/8"  (16mm)
            Rudder: Right & Left  1-1/8" (29mm)   2"     (51mm)
            Flaps:                  1/2" (13mm)   1-1/8" (29mm)

COMMENTS: Robart makes tri-gear retracts (ROBQ1622) especially for this model.
            If using these, an Air Kit (ROBQ2307) and Air Line Quick Disconnect
            (ROBQ2395) are also required.
          This airplane can be flown off water with the optional retracts
            installed. The amphibian nose wheel cover must be taped in place
            with clear box tape. The retracts MUST be disabled during water
            take offs and landings.
          The aircraft cannot take off from land and then land on water or vice
            versa.

ACCESSORIES
             THIS IS THE ARF GREAT PLANES SEAWIND .60 AIRPLANE.
FEATURES: FIBERGLASS FUSELAGE COWL CANOPY & WING TIPS, BALSA & PLY WINGS, METAL
 WATER RUDDER, COVERED IN TOPFLITE MONOKOTE, SELF DRAINING WATER BAILER ON FUSE
REQUIRES: .60 CU IN (10CC) 2-STROKE OR .70-.91 CU IN (11.5-15CC) 4-STROKE
 ENGINE, 5-7 CH RADIO, 7-9 SERVOS, BUILDING & FIELD EQUIPMENT