GPMA0180   Great Planes   RV-4 40 Sport Kit .40-.52,54.65" 

TECH NOTES
         This is a Radio Controlled, Glow Powered, Balsa and Plywood
          Great Planes RV-4 .40 Sport Scale Aerobatic Airplane Kit.
                For Intermediate to Advanced Modeler/Flyers.
     Recommended for modelers who have had trainer airplane experience and
                 also have mastered flying low wing planes.

FEATURES: Easy interlocking balsa and plywood construction, with built-in
            thrust angles and a wing that assembles flat on die-cut tabs.
          Wings are one-piece, all wood
          Spacious radio compartment allow easy radio gear installation and
            quick fuel tank access.
          White ABS plastic cowling and wheel pants.
          Crystal-clear butyrate canopy.
          Cockpit features a triangle roll-over bar and tandem instrument
            panels.
          Fixed, pre-formed aluminum main landing gear.
          Dual aileron servos for precision and authority.
          The wing can be built with or without flaps.  The kit slows well for
            easy landings either way.
          Generous package of Great Planes hardware includes rod-in-tube
            pushrods for smooth control surface operation.
          Reinforced nylon Adjustable Engine Mount fits any 2- or 4-stroke
            engine within the recommended range.
          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit to be free from defects in both materials and workmanship at
            the date of purchase.

INCLUDES: All wood to construct the airplane, pushrods, prebent aluminum
            main landing gear, 3/32" tailwheel wire, nylon adjustable engine
            mount, hardware package, ABS plastic cowling and wheel pants, clear
            canopy, decals, photo-illustrated instructions, full-size rolled
            plans.

REQUIRES: Engine:  .40-.52 (6.5-8.5cc) (2-stroke)
              OR   .48-.70 (8.0-11.5cc)(4-stroke)
          Muffler: Pitts-Style is recommended so that the muffler will be
                   concealed inside of the cowling.
          Radio:   4-5 Channel
                   (5-channel with 7 servos for optional flaps)
          Servos:  5-7  40oz/in torque minimum
                      (2-ailerons, 1-elevator, 1-rudder, 1-trottle)
                      (2-for optional flaps)
          Servo Extension 6": 4 (for flaps and receiver)
          Servo Extension 12": 2 (for ailerons)
          Y-Harness: (1-for aileron servos) (1-for optional flap servos)
          Misc. Items: (2) 2-1/2" main wheels, (1) 1" tailwheel, 2-1/4" spinner
            10 oz fuel tank, glow plug, 1/4" foam rubber padding, 3' medium
            fuel tubing, fuel filter, propeller, building and field equipment.

SPECS:    Wingspan:     54.65" (1388mm)
          Wing Area:    631.6 sq in (40.8 sq dm)
          Weight:       5.75 - 6.25 lb (2.6-2.8 kg)
          Wing Loading: 20.9 - 22.8 oz/sq ft (64.1 - 69.7 g/sq dm)
          Length:       49.6" (1260mm)
          Airfoil:   Semi-Symmetrical, Low-Wing, Selig 8036
          Center of Gravity: 3-3/4" (95mm) Back from the wing's leading edge
            at the fuselage sides.
          Control Throws-           Low Rate       High Rate
            Ailerons: Up & Down    1/2" (13mm)     3/4" (19mm)
            Elevator: Up & Down    1/4" (7mm)      5/8" (16mm)
            Rudder: Right & Left   7/8" (22mm)  1-1/16" (27mm)
            Flaps:  Down           1/2" (13mm)       1" (25mm)
          Incidence-
            Engine Down Thrust: 2 degrees
            Wing: positive 2 degrees
            Stabilizer: 0 degree

COMMENTS: The pilot shown inside the plane is not included.
          The covering used on the pictured kit was MonoKote White with Black
            Aluminum and Royal Blue Stripes.
          Decal sheet RV44D01 sold only through GP Manufacturing includes:
            17-3/8" x 3-1/8" black N-0711E
              Two 2-1/2" x 7/16" black N-0711E
              Two 2-5/8" x 5/8" red and black Great Planes logos
              11-1/4" x 2-3/4" blue RV-4
              3-5/8" x 1-3/8" instrument panel
              3-3/4" x 3/4" instrument panel
              2-3/8" x 1-3/4" ownership tag with clear frame
    
ACCESSORIES
  THIS IS A RV-4 .40 R/C, GLOW POWERED, BALSA AND PLYWOOD AEROBATIC AIRPLANE.

INCLUDES: ALL WOOD TO BUILD KIT, CLEAR CANOPY, HARDWARE, PLANS, INSTRUCTIONS,
          ABS PLASTIC COWLING AND WHEEL PANTS, ENGINE MOUNT, ALUMINUM MAIN GEAR

REQUIRES: 4-5 CH RADIO W/5-7 SERVOS, .40-.52(2-STROKE) OR .48-.70(4-STROKE)
 ENGINE, GLOW PLUG, PROP, FUEL, FUEL TUBING, Y-HARNESS, BUILDING & FIELD EQUIP.

  |  Homepage  |  ARF  Planes  |  Electric  |  Kits  |  Park Flyers  |  Sailplanes  |  Search  |