|
Great Planes |
Hobbies R Us |
Great Planes |
|
|
R/c Airplanes Arf |
GPMA1112 Great Planes CAP 580 Matt Chapman Profile EP 3D ARF
TECH NOTES
This is a radio controlled, electric powered, foam
Great Planes Matt Chapman Cap 580 3D Profile Park Flyer Airplane.
For Intermediate to Advanced Modeler/Flyers.
**Additional Technical Info Will be Added When It Becomes Available**
FEATURES: Construction: 1/8" (3mm) thick foam with carbon fiber reinforcing
rods to strengthen the infastructure
Wings:
Landing gear: Hinges, pushrod holders, brackets, Z-bends and more
are designed to break apart upon impact to prevent damage to the
motor and main structure
Wheel Pants:
Building Time: Flight ready in 2-3 hours
Hardware: Carbon fiber pushrods and wing struts, clip-hinge system
on tail section allows up to 80° of deflection without binding and
also pops loose in the event of a crash
Motor: T-370 size brushed
Gearbox: 5:1 gear ratio
Propeller: slow flyer with prop saver
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
the date of purchase.
INCLUDES: Cap 580 foam construction 3D airplane, 370 size motor, 5:1 gearbox,
10x3.8 slow flyer propeller, hardware and instructions
REQUIRES: Speed Control: 10 amp
Battery: 3S 350mAh lithium polymer
Charger: Lithium polymer capable
Radio: 4-Channel
Servos: 3 Micro
Servo Extension 6":
Misc. Items: building and field equipment
SPECS: Wingspan: 36" (915mm)
Wing Area: 222 sq in (14 sq dm)
Weight: 7.5 - 9.0oz (215 - 225g)
Wing Loading: 5-6oz/sq ft (15-18g/sq dm)
Length: 30.5" (770mm)
Airfoil:
Center of Gravity: - / " ( mm) Back from the wing's leading edge
at the fuselage sides.
Control Throws- Low Rate High Rate
Ailerons: Up & Down / " ( mm) / " ( mm)
Elevator: Up & Down / " ( mm) / " ( mm)
Rudder: Right & Left / " ( mm) / " ( mm)
| Homepage | ARF Planes | Electric | Kits | Park Flyers | Sailplanes | Search |