GPMA1571   Riot 3D EP Bipe ARF Transparent Yellow

TECH NOTES
     This is the radio controlled, electric powered, almost-ready-to-fly,
          Great Planes ElectriFly Riot 3D Sport Aerobatic Airplane.
      Recommended for modelers with a good amount of low wing experience.
                             For ages 14 and up.

  **Additional Technical Information Will Be Added As It Becomes Available.**

FEATURES: Construction: Laser cut balsa and plywood
          Wings: One-piece all wood
          Covering: Factory applied high quality heat shrink film, transparent
            yellow in color
          Radio Compartment: Located on bottom of fuselage
          Wheels:   " (  mm) diameter
          Landing Gear: Pre-bent wire   " (  mm) diameter
          Wheel Pants:
          Aileron Control:

          Building Time: Ready to fly in only 3-4 hours.
          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit to be free from defects in both materials and workmanship at
            the date of purchase.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
            pre-bent landing gear, wheels, wheel pants

            photo-illustrated instruction manual

REQUIRES: Radio: 4-Channel
          Servos: 3-Micro (1-Aileron, 1-Elevator, 1-Rudder)
          Motor: Rimfire 28-22-1380kV brushless out runner, GPMG4505
          Battery: 350-640mAh 3-cell LiPo, GPMP0803, GPMP0805
          Battery Charger: LiPo compatible
          Electronic Speed Control: 8A micro, GPMM1800
          Slo-Flyer Propeller: APCQ5000
          Misc. Items:
            building and field equipment

SPECS:    Wingspan: 20.5" (515mm)
          Wing Area: 235 sq in (15.2 sq dm)
          RTF Weight: 7.4 oz (210-225g)
          Wing Loading: 4.5 - 4.9oz/sq ft (14 - 15g/sq dm)
          Length: 22.75" (580mm)
          Airfoil: Fully-Symmetrical
          Center of Gravity: 2-5/16" (58mm) Back from the leading edge of the
            top wing
          Control Throws-          High Rate        Low Rate       3D
            Elevator: Up & Down   1/2" (13mm)    3/8 " (9.5mm)    1-3/8" (35mm)
            Rudder: Right to Left 1-3/8" (35mm)  1" (25mm)       2" (51mm)
            Ailerons: Up & Down   5/8" (16mm)    3/8" (9.5mm)    2" (51mm)

COMMENTS:

ACCESSORIES
THIS IS THE ELECTRIC POWERED GREAT PLANES ELECTRIFLY RIOT 3D SPORT AEROBAT.
FEATURES: LASER CUT BALSA & PLY CONSTRUCTION, CAPABLE OF ALL 3D MANEUVERS,
 WHEEL PANTS,
REQUIRES: 4CH RADIO W/3 MICRO SERVOS, 8A SPEED CONTROL, BRUSHLESS OUTRUNNER
 MOTOR, LIPO BATTERY & CHARGER, PROP, BUILDING & FIELD EQUIPMENT