GPMA1867   XPD-8 EP Ducted Fan Flying Wing w/o Fan-Motor

TECH NOTES
This is the radio controlled, electric powered,
Great Planes ElectriFly XPD-8 Ducted Fan Flying Wing.

***The manual under Radio Equipment and Electronics lists an incorrect***
***battery. This battery will not fit.***
***Please use GPMP0815 LIPO 910 11.1V 15C SAFECHARGE battery.***

FEATURES: Construction: EPS foam, prepainted Black with Red stripe accents
Wings: Integrated with fuselage, foam winglets add stability
Top Hatch (canopy): EPS foam Black with Blue window detail
Radio Compartment: Accessible under duct channel top hatch fastens
to channel with magnets
Building Time: Ready to fly in only 1-2 hours
Warranty: Great Planes Model Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at
the date of purchase.

INCLUDES: Great Planes ElectriFly XPD-8 Ducted Fan Flying Wing with
hand grip, winglets, photo-illustrated manual

REQUIRES: Radio: 3-channel minimum with micro receiver (FUTJ53**), transmitter
must be capable of elevon mixing or separate mixer is required
Servos: 2 micro size
6" (152mm) Servo Extension: (HCAM2000)
As some servos have short leads, a 6" (152mm) servo extension may be
required
Ducted Fan Unit with Motor: (GPMG3911)
Electronic Speed Control: 25A (GPMM2025)
LiPo Battery: 910mAh 3S, (GPMP0815)
Battery Charger: LiPo compatible (GPMM3010)
Misc. Items: Building and Field Equipment

SPECS:    Wingspan: 28" (710mm)
Wing Area: 210 sq in (13.5 sq dm)
Weight: 11.6 - 13.9oz (330-395g)
Wing Loading: 8 - 9.6 oz/sq ft (24.5 - 29.4 g/sq dm)
Length: 15" (380mm)
Center of Gravity: 6-1/8" (156mm) Back from the wing's leading edge
on both sides of the fuselage
Control Throws            High Rate              Low Rate
Elevon Up and Down:    1/2" (13mm)            5/16" (8mm)
Aileron Up and Down:   1/2" (13mm)            5/16" (8mm)

COMMENTS: Also available with Ducted Fan System, GPMA1865.

ACCESSORIES					

THIS IS THE GREAT PLANES ELECTRIFLY XPD-8 DUCTED FAN FLYING WING
FEATURES: EPS PAINTED FOAM CONSTRUCTION, WINGLETS PROVIDE EXTRA STABILITY,
MOLDED-IN HANDGRIP FOR LAUNCHING, MAGNETIC HATCH
REQUIRES: 3-CH W/MICRO RECEIVER & 2 MICRO SERVOS, 6" (152MM) EXTENSION, 20-25A
ESC, 910MAH 3S LIPO BATTERY, CHARGER, DUCTED FAN UNIT W/MOTOR