GPMP1001   Master Caddy Pre-Built

TECH NOTES
    This is the Pre-Built Master Caddy with APS (Auxiliary Power Station).
   This Field Box carries all the accessories you need to maintain and fly
   your airplane and the APS Tote detaches for convenient flight line use.

FEATURES: All of the features of the Master Caddy, in a 90% preassembled
            version.
          Well-thought-out design saves space while neatly storing and
            organizing all necessary Flight Line equipment.
          Includes three top compartments, two large drawers with dividers,
            and a shelf for securely holding a gallon of fuel.
          Cushioned, adjustable-width cradles safely hold models for cleanup
            or repairs.
          90-Day Warranty.

INCLUDES: One mostly Pre-Built and Pre-Painted White Master Caddy Field Box
             with Auxiliary Power Station Tote.
          Black, Red and Dark Blue colored decals
          Four Cradle Arms (2 left, 2 right)
          Four Rubber Feet
          24" Foam Tubing
          Four 3x10mm sheet metal screws
          Two 1/4-20 bolts
          Two 4x24mm screws
          Two 4mm washers
          Four 4x18 washer head screws
          Two 6x24mm phillips head bolts
          Four 6mm washers
          Two 6mm wing nuts
          Two 8x13mm screws
          a section of black Velcro

SPECS:    Length: 25"   Width: 8-1/4"   Height: 15"

REQUIRES: Installing your own field equipment and accessories.
          Minimal assembly, using phillips screwdriver, a hobby knife,
            medium CA glue, foam rubber to insulate 12V battery, and
            purchasing 1/2 to 1 gallon fuel jug (like GPMP4150) if desired
          Screwing together the APS
          Installing drawer knobs and bottom feet
          Assembling cradle
          Installing Velcro to hold (optional) fuel jug

COMMENTS: Pre-built version comes with decals that feature a slightly different
            trim scheme than Kit version. This pre-built version also has black
            drawer knobs)
          The hole for the power panel is intentionally made smaller to
          accommodate many different panels.

 |  Homepage  |  R/C 
        Airplanes  |  Accessories  |  Batteries  |   Chargers  |  Covering  |  Decals  |  Electronic 
        Speed Controls  |  Engines  | 

|  Engine Mounts  |  Field Equipment  |  Fuel  |  Fuel Tanks  |  Glow Plugs  |  Glues  |  Landing Gears  |  Nuts/Bolts  |  Paint  |  
 

|  Paint Supplies  |  Props  |  Push Rods  |  Radios  |  Simulators  |  Spinners  |  Tools  |  Wheels  |  Search  |