GPMG4500   Rimfire 22M-1000 Brushless Motor

TECH NOTES
         This is the Great Planes ElectriFly RimFire Brushless Motor.
         Ideal power upgrade for smaller 3D aerobats and flat foamies.

            *** One Year Limited Warranty - USA & Canada Only ***

FEATURES: "Outrunner" design eliminates need for external gear drive for many
            applications
          Propeller mounting system eliminates need for prop adapter for many
            applications (propeller is secured to motor shaft with O-rings)
          Dual ball bearings, shielded on both sides
          Strong Neodymium "rare earth" magnets for high output torque and one
            of the highest temperature ratings in R/C at 302°F (150°C) for
            longer life

INCLUDES: One Great Planes ElectriFly RimFire Brushless Motor
          Three 3x5mm standard thread, round head mounting bolts
          Two 2.6x10mm standard thread, flat head hex key bolts
          Six small #10 rubber O-rings

REQUIRES: Electronic Speed Control for brushless motors, the BL-8 (GPMM2070)
            is ideal for the RimFire 22M-1000 brushless motor for small 3D
            flat foam airplanes
          **Do not attempt to operate motor with ESC designed for brushed**
                 **motors. Permanent damage to motor will result.**

          Installing in airplane
          2mm female bullet connectors (GPMM3111)

SPECS:    Motor Diameter and Length: 28 x 29mm (1.10 x 1.14")
          Stainless Steel Output Shaft Diameter and Length:  3.0 x 12mm
          Weight: 42g (1.48oz.)
          Input Voltage: 7.2-12V DC
          Magnet Wires Temp Rating: 160°C (320°F)
          kV Rating: 1000 RPM/V
          Max. Constant Current: 11A
          Max. Surge Current: 15A
          No Load Current: 0.65A
          Internal Resistance: 235 milli-ohms

COMMENTS: Other ESCs for brushless motors include;
            GPMM1800   SS8  8 AMP ESC
            GPMM1810   SS12 12 AMP ESC
            GPMM1820   SS25 25 AMP ESC
            GPMM1830   SS35 35 AMP ESC
            GPMM1840   SS45 45 AMP ESC

          The "22M stands for the length of the Stator. The Stator being the
            base section which mounts to the airplane, it has a cylindrical
            shaft which runs up through the center. That shaft is 22mm long.
          The "1000" stands for RPM per Volt.

          This RimFire motor is capable of handling up to 11 amps of current.
            And ElectriFly's BL-8 ESC (GPMM2070) puts out a maximum of 8 amps
            of current.  When putting a BL-8 ESC and a RimFire motor into any
            ElectriFly FlatOut airplane AND USING THE RECOMMENDED PROP, the
            motor/ESC system will not need more than 8 amps.  The motor will
            not try to draw more current than the BL-8 ESC can deliver WHEN THE
            CORRECT SIZE OF PROPELLER IS USED.  This motor/ESC combo is
            perfectly matched to the performance of the FLATOUT SERIES OF
            PLANES AND THEIR RECOMMENDED PROP SIZE as well as similar type
            airplanes.  However, when putting a RimFire in a bigger model
            which WILL need more than 8 amps, the BL-8 ESC will not be
            powerful enough to deliver the maximum current that the motor will
            require, and a larger ESC will be necessary.

RECOMMENDED PROPS:      For 2-cell Li-Po           For 3-cell Li-Po
                             10x3.8                      8x3.8
                             10x4.7                      8x6
                             11x3.8                      9x3.8

|  Homepage  |  ARF  Planes  |  Electric  |  Kits  |  Park Flyers  |  Park Flyer Accessories  |  Sailplanes  |  Search  |