GPMM2025   C-25 Mini Brushed ESC w/BEC

TECH NOTES
     This is the C-25 Mini High Frequency Electronic Speed Control w/BEC.
         For small to medium size electric aircraft with 400 size and
          some 500 and 600 size brushed motors requiring 25A or less.

FEATURES: Compact size to minimize weight and simplify installation
          Programmable battery types
          Programmable brake
          Pushbutton, twin LEDs and audible tones for easy set-up.
          On/Off switch and LEDs on an externally mountable lead.
          Automatic temperature protection reduces max. throttle to 70%
            when max. temperature is reached.
          Very smooth throttle response
          Uses "Safe-Start" system to prevent accidental motor starts by
            disabling the motor circuitry until the throttle stick is moved to
            full throttle, then to the OFF position
          Factory installed radio, motor and battery connectors
          Fully proportional forward only with programmable brake
          Battery Eliminator Circuitry provides sufficient current for the
            receiver and two standard servos. The motor battery powers the
            receiver and servos, then when voltage is reduced to the
            appropriate voltage, the low voltage cut-off circuitry stops the
            motor while continuing to supply power to the receiver and servos
          High frequency to optimize battery run-time and cool operation.
          Pushbutton twin LEDs and audible tones for easy set-up
          180 day limited warranty

INCLUDES: One C-25 Mini Electronic Speed Control with Deans ultra male
            connector for battery, 3.5mm gold plated female bullet motor
            connectors and universal receiver connector
          One instruction sheet.

REQUIRES: Attaching to motor and setting up speed control
          Battery pack
          Plug universal plug into the throttle channel on the receiver

SPECS:    Length:              .98" (25mm)
          Height               .43" (11mm)
          Width:               .71" (18mm)
          Weight:              0.85 ounce (24.1g) with wires
          Input:               6-10 NiCd/NiMH cells; 2-3 Li-Po cells
          Max Rated Current:   25A continuous
          BEC Voltage:         5V/1.5A
          Low Voltage Cutoff:  0.80V per cell for NiCd/NiMH,
            2.75V per cell for Li-Po
          Connectors: Receiver lead- Universal
                      Battery lead- Deans Ultra male
                      Motor Connector- 3.5mm gold plated female
                                         bullet connectors
          Switching Frequency: 1.3kHz
          Motor Size:          400 (and some 500 & 600 size) brushed only

COMMENTS: Will handle 2 standard servos.
          Do NOT use with brushless motors.

|  Homepage  |  ARF  Planes  |  Electric  |  Kits  |  Park Flyers  |  Park Flyer Accessories  |  Sailplanes  |  Search  |