GWSA1007     SlowStick-NPS Slope Glider Park Flyer EP ARF 

TECH NOTES

This is the GWS EP easy build ARF Slow Stick Park Flyer
Slope Glider.
For Beginner to Intermediate Modeler/Fliers.

FEATURES: Fuselage: Aluminum channel
Wings:  One-piece foam construction
Landing gear: Pre-bent one piece wire with two 76.2mm diameter wheels
and one 25.4mm diameter tail wheel and tail skid wire.
Hardware: All necessary hardware included
Can be constructed with a removable tail
Warranty: GWS guarantees this kit free from defects in both
materials and workmanship at the date of purchase

INCLUDES: Aluminum fuselage channel, main and tail landing gear,76.2mm main
wheels, 25.4mm tail wheel, spinner, GWS glue, rubber bands, color photo
illustrated instructions, all necessary hardware and CD-ROM disc of
new products and decals.

REQUIRES: Battery 4.8-6.0V 600mAh AA cells
Charger: Timed or peak for 2/3 AA cells
Radio:   2-4 Channel
(2-channel for glider)
Servos: 2 Naro, Micro, or Mini servos
(1-elevator, 1-rudder)
Misc. Items: Building and field equipment
Required for removable tail units in addition to the above is a
electric drill, hacksaw and 1mm drill bit.

SPECS:    Wingspan:   46.3"(1176mm)
Wing Area: 505.9sq in (32.64 sq dm)
Weight:     11.9-15.5 oz(338-440 grams)
Wing Loading: 3.39oz/sq ft (10.3g/sq dm)
Length:     37.6" (954mm)
CG for Glider Version: 2-1/2"-3-3/4" (65-95mm) from the wings
leading edge dependent on wind conditions
Control Throws:
Elevator: Up & Down 20°
Rudder: Right & Left 35°
Incidence-
Wing: N/A from manufacturer
Stabilizer: N/A  from manufacturer

COMMENTS: This is the version that does not need nor includes any power
system.

ACCESSORIES

THIS IS THE GWS SLOW STICK SLOPE GLIDER.
INCLUDES: ALL FOAM TO BUILD THE KIT, FUSELAGE CHANNEL, PUSHRODS, HARDWARE,
WHEELS, DECALS, GLUE, INSTRUCTIONS AND PHOTO-ILLUSTRATED MANUAL
REQUIRES: 4 CHANNEL RADIO, 4 NANO SERVOS, CHARGER, ESC AND FIELD EQUIPMENT