GWSA1008     P-J3-SC Pico J3 Stick Park Flyer EP ARF w/IPS-CB 

TECH NOTES

This is the GWS Pico-J3 Stick indoor R/C ARF airplane
with the IPS-DX2BB-AX indoor power unit.
This kit was designed for beginner to intermediate Modelers/Fliers.

FEATURES: Construction: Wood fuselage channel with Yellow foam wing and tail
sections
Wings:  Two piece foam wing
Radio Compartment: Plastic parts which slide onto the fuselage
channel
Landing gear: Pre-bent main and tail skid wires
Hardware: Included
Motor Mount: Included
Warranty: Grand Wing Servo-tech Company Ltd. guarantees this
kit free from defects in both materials and workmanship at
the date of purchase.

INCLUDES: Foam wing halves, horizontal and vertical stabilizers, main landing
gear and tail skid wires, two 2.4" (60mm) ultralight main wheels and
2.44" (62mm) tires, wood fuselage channel,IPS-DX2BB-AX power unit
with EP1047 prop, spinner, photo-illustrated instructions,
hardware and decal sheet

REQUIRES: Speed Control: 10A recommended
Battery: 6-7.2V 110-270mAh
Charger: Timed or Peak for flight battery
Radio:   2-3 Channel with micro receiver
Servos:2 pico or naro series (sub micro or micro)
( 1-elevator, 1-rudder)
Misc. Building and field equipment

SPECS:    Wingspan: 41.3" (1050mm)
Wing Area: 260oz/sq in (16.8sq dm)
Weight: 6.53-7.05oz (185-200g)
Wing Loading: 3.6oz/sq ft (11.1g/sq dm)
Length: 26.6" (675mm)
Airfoil: Flat bottom high wing
Center of Gravity: 5.1" (130mm) Back from the from the rear edge
of the IPS (indoor power system)
Control Throws-Not supplied from manufacturer

COMMENTS: This version includes the IPS system with the EP1047 prop which is
a 10x4.7 electric prop.

ACCESSORIES

THIS IS THE ALMOST READY TO FLY GWS PICO-J3-S INDOOR & SLOW FLYER.
FEATURES: FOAM CONSTRUCTION, IPS-DX2BB-AX INDOOR POWER UNIT, 2-PIECE FOAM HIGH-
MOUNT WING, PRE-BENT WING LANDING GEAR W/WHEELS & TAIL SKID
REQUIRES: 2-3 CH RADIO W/2 SUB-MICRO SERVOS & ELECTRONIC SPEED CONTROLLER,
6V-7.2V BATTERY, CHARGER, BUILDING & FIELD EQUIPMENT