GWSA1009   GWS   Pico J3 ARF w/IPS-CB Yellow 39.8"

TECH NOTES
       This is the GWS Pico-J3 Stick Indoor & Slow Flyer R/C ARF airplane
                      with the IPS-CB indoor power unit.
      This kit was designed for beginner to intermediate Modeler/Fliers.

FEATURES: Construction: Yellow Foam Fuselage with yellow foam wing and tail
            sections
          Wings: Two piece foam wing
          Radio Compartment: Plastic parts which slide onto the fuselage
            channel
          Landing Gear: Pre-bent main and tail skid wires
          Hardware: Included
          Motor Mount: Plastic with preinstalled motor, shaft and gear
          Warranty: Grand Wing Servo-tech Company Ltd. guarantees this
            kit to be free from defects in both materials and workmanship at
            the date of purchase.

INCLUDES: Foam wing halves, horizontal and vertical stabilizers, main landing
            gear and tail skid wires, two 2.4" (60mm) ultra light main wheels
            and 2.4" (62mm) tires foam fuselage channel, IPS-CB power unit
            with an EP1047 prop, spinner, photo-illustrated instructions,
            hardware, and decal sheet.

REQUIRES: Speed Control 10A recommended: GPMM2010
          Battery: 6.0-7.2v 110-270mAh: GWSA7006
          Charger: Timed or peak: GPMM3000
          Radio: 2-3 Channel with micro receiver: FUTK41
          Servos: (sub micro or micro)( 1-elevator, 1-rudder)
          Misc. building and field equipment

SPECS:    Wingspan: 39.8" (1010mm)
          Wing Area: 263 sq. in (16.99 sq dm)
          Weight: Not Supplied by Manufacturer
          Wing Loading: 4oz/sq ft (12.2g/sq dm)
          Length: 27.1" (690mm)
          Airfoil: Flat bottom high wing
          Center of Gravity: 2.0"-2.4" (50-60mm) back from the leading edge
            of the main wing
          Control Throws: Not supplied from manufacturer

COMMENTS: This version includes the IPS system with the EP1047 prop which is
          a 10x4.7 electric prop.
                                                                   
ACCESSORIES
      THIS IS THE ALMOST READY TO FLY GWS PICO-J3-S INDOOR & SLOW FLYER.
FEATURES: FOAM CONSTRUCTION, IPS-CB INDOOR POWER UNIT, 2-PIECE FOAM HIGH-
  MOUNT WING, PRE-BENT WING LANDING GEAR W/WHEELS & TAIL SKID
REQUIRES: 2-3 CH RADIO W/2 SUB-MICRO SERVOS & ELECTRONIC SPEED CONTROLLER,
  6V-7.2V BATTERY, CHARGER, BUILDING & FIELD EQUIPMENT