GWSA1022     P-51D NPS w/Land Gear White WWII War Bird Slope Glider 

TECH NOTES

This is the"P-51D" Mustang Slope glider from the GWS
Easy WWII Fighter series foam airplane kits.
For Intermediate to Advanced Modelers/Fliers.

FEATURES: Construction: Easy interlocking foam parts, with built-in
thrust angles
Wings: One piece white foam wing with ailerons
Radio Compartment: Molded into fuselage under the cockpit
Cowling: Molded into fuselage yellow and orange colored decal covered
Canopy: Clear plastic
Cockpit Features: Molded white foam with instrument panel decal
Landing Gear: None
Aileron Control: Single servo mounts in the wing
Hardware: All required included
Motor Mount: Included
Warranty: Grand Wing Servo Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at
the date of purchase.

INCLUDES: Left and right foam fuselage halves, one foam wing, one horizontal
stabilizer, spinner and mount, motor mount, hardware package,
hinges, clear canopy, plastic parts tree, decals, GWS glue, and
photo-illustrated instructions

REQUIRES: Radio: 4 channel with micro receiver
Servos: 3 pico or naro series servos
(1-ailerons, 1-elevator, 1-rudder)
6" (152mm) servo extension wire for ailerons
Battery: 4.8V battery for radio equipment
Building and field equipment
Acrylic water based paint optional

SPECS:    Wingspan: 34" (870mm)
Wing Area: 204sq in (13.2sq dm)
Weight: 12-14oz (340-396g)
Wing Loading: 8.5 oz/sq ft (26g/sq dm)
Length: 29" (737mm)
Airfoil: Fully-symmetrical, low-wing
Center of Gravity: 0.24" (6mm) in front of bamboo reinforcement stick
Control Throws-
Ailerons: Up & Down   0.27" (7mm)
Elevator: Up & Down   0.24" (6mm)
Rudder: Right & Left  0.39" (10mm)
Incidence-
Wing: N/A per manufacturer
Stabilizer: N/A per manufacturer

COMMENTS: This slope glider version of the P-51D Mustang does not include
motor, landing gear, tail gear, wheels, prop or gearbox.

THIS IS THE GWS P-51D MUSTANG SLOPE GLIDER.
INCLUDES: FUSELAGE, WING, HORIZONTAL STABILIZER, SPINNER AND MOUNT, HARDWARE,
DECALS, GWS GLUE AND INSTRUCTION MANUAL
REQUIRES: 4CH RADIO WITH MICRO RECEIVER AND THREE MICRO SERVOS, 4.8V RECEIVER
BATTERY, CHARGER, 6" SERVO EXTENSION WIRE, BUILDING AND FIELD EQUIPMENT