GWSA1024     DHC2-EPS350 Beaver Park Flyer EP ARF w/EPS-350C 

TECH NOTES

This is the Grand Wing Servo de Havilland Beaver (DCH-2) electric
powered foam kit with the EPS-350C power system.
Recommended for beginner to intermediate modelers/fliers.

FEATURES: Construction: All foam
Wings: One piece foam wing
Radio Compartment: molded into fuselage
Cowling: Plastic
Landing Gear: Pre-bent 1.6mm diameter main gear wire and 1.2mm tail
dragger wire. 2" (51mm) main and 1" (25mm) tailwheel included.
Hardware: Included
Power System: EPS-350C with a E1047(10x4.7) electric prop
Warranty: Grand Wing Servo Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at
the date of purchase.

INCLUDES: Right and left foam fuselage and wing halves, horizontal stabilizer,
vertical fin, plastic wing joint cover, cowl, and battery holder,
EPS-350C power system/E1047 prop, plastic parts tree, GWS glue,
decal sheet, double sided tape, hardware, photo-illustrated
instructions

REQUIRES: 3-4 channel radio with two pico, naro or mini servos
(1-elevator 1-rudder) and 3-4ch micro receiver.
Speed Control: 10A or more
Battery: 7.2V 2/3AA 270-400mAh or 7.2V 600mAh AA
Charger
Misc. building equipment

SPECS:    Wingspan: 39.8" (1010mm)
Wing Area: 263sq in (16.8sq dm)
Flying Weight: 10.23-12.35oz (290-350g)
Wing Loading: 5.64oz/sq ft (17.26g/sq dm)
Length: 27.4" (695mm)
Airfoil: Flat bottom, high wing
Center of Gravity: 1.8"- 2.2" (45-55mm) Back from the wing's leading
edge at the fuselage sides.
Control Throws-           Low Rate       High Rate
GWS does not provide the information of this nature in their manual.

COMMENTS: It is not recommended to exceed the voltage of the battery listed as
this may cause damage to the EPS system.
GWS has included an instruction sheet containing information for
strengthening the wing and reinforcing the tail.

ACCESSORIES

THIS IS THE GWS RADIO CONTROLLED DHC2-SG BEAVER WITH 350C POWER SUPPLY
FEATURES: ALL FOAM CONSTRUCTION, 1-PIECE FLAT BOTTOM HIGH MOUNT WING, TUBE OF
GWS GLUE, 1" (25MM) BLACK RUBBER SPINNER, WHITE PLASTIC COWL, DECALS
REQUIRES: 2-4CH RADIO, W/2 MINI SERVOS, TOOLS, CA GLUE, SPEED
CONTROL, MOTOR BATTERY, CHARGER