GWSA1025     GWAEO016 Beaver Slope Glider Park Flyer EP ARF 

TECH NOTES

This is the Grand Wing Servo de Havilland Beaver(DCH-2)
This is the Slope Glider version.
Recommended for beginner to intermediate modelers/fliers.

FEATURES: Construction: All foam
Wings: One piece foam wing
Radio Compartment: Molded into fuselage
Cowling: Plastic
Landing Gear: None, model must be hand launched and belly landed
Hardware: Included
Warranty: Grand Wing Servo Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at
the date of purchase.

INCLUDES: Right and left foam fuselage and wing halves, horizontal stabilizer,
vertical fin, plastic wing joint cover, cowl, battery holder,
plastic motor mount pod, spinner, plastic parts tree, GWS glue,
decal sheet, double sided tape, hardware, photo-illustrated
instructions

REQUIRES: 2-4 channel radio with two pico, naro or mini servos
(1-elevator 1-rudder) and 3-4ch micro receiver.
Battery: 4.8V (FUTM1210)
Misc. building equipment

SPECS:    Wingspan: 39.8" (1010mm)
Wing Area: 263sq in (16.8sq dm)
Flying Weight: 10.23-12.35oz (290-350g)
Wing Loading: 5.64oz/sq ft (17.26g/sq dm)
Length: 27.4" (695mm)
Airfoil: Flat bottom, high wing
Center of Gravity: 1.7"-2.2" (45-55mm) Back from the wing's leading
edge at the fuselage sides.
Control Throws-           Low Rate       High Rate
GWS does not provide the information of this nature in their manual.

COMMENTS  GWS has included an instruction sheet containing information for
strengthening the wing and reinforcing the tail.

ACCESSORIES

THIS IS THE GWS RADIO CONTROLLED DHC2-SG BEAVER SLOPE GLIDER.
FEATURES: ALL FOAM CONSTRUCTION, 1-PIECE FLAT BOTTOM HIGH MOUNT WING, TUBE OF
GWS GLUE, 1" (25MM) BLACK RUBBER SPINNER, WHITE PLASTIC COWL, DECALS
REQUIRES: 2-4CH RADIO, W/2 MINI SERVOS, 4.8V RX PACK, TOOLS, CA GLUE