GWSA1027     GWAEO014A ESTARTER NPS Glider Park Flyer EP ARF w/Landing Gear 

TECH NOTES

This is the Grand Wing Servo E-Starter Foam Trainer.
This kit is designed for the intermediate modelers/fliers.

FEATURES: Construction: Easy interlocking foam with built-in thrust angles
Wings: One-piece foam construction
Radio Compartment: Molded into fuselage
Cowling: Plastic
Landing Gear: Pre-bent 2mm diameter wire main gear with tail gear
wire
Wheels: Main, two 3" (76.2mm) ultralite plastic, one 1" (25.4mm)
tailwheel
Hardware: Included
Motor Mount: Included
Warranty: Grand Wing Servo Company Ltd., guarantees this kit free
from defects in both materials and workmanship at date of purchase.

INCLUDES: All foam fuselage halves,wing,and tail sections,plastic cowling,2mm
main landing gear, 1.2mm tail wire, 3" (76.2mm) diameter main
wheels, 1" (25.4mm) diameter tail wheel, plastic battery seat,
decals and photo-illustrated instructions

REQUIRES: Speed Control: 20A recommended
Battery: 7.2-8.4V AAA 500-730mAh NiMh or
7.2-8.4V 270-400mAh 2/3 AA NiCd or AA 600mAh NiCd
Charger: Timed or peak
Radio: 3-4 channel
Servos: 3 pico or naro (micro or mini) servo
(1-ailerons, 1-elevator, 1-rudder)
Servo Extension 6": For ailerons
Building and field equipment

SPECS:    Wingspan: 37.8" (960mm)
Wing Area: 265sq in (17.1sq dm)
Weight: 14.1 - 17.6oz (400 - 500g)
Wing Loading: 7.7 - 9.5oz/sq ft (23.4g - 29q/sq dm)
Length: 30.54" (725mm)
Airfoil: High wing flat bottom
Center of Gravity: Marked on the bottom of the wing, approximately
2.9" (73mm) behind leading edge of wing at fuselage side
Control Throws-
Ailerons: Up & Down     5/16"(7.9mm)
Elevator: Up & Down     1/2" (12.7mm)
Rudder: Right & Left    1/2"(12.7mm)

ACCESSORIES

This is the Electric Powered GWS E-Starter ARF Airplane.
FEATURES: Foam construction, 1-piece wing, wire landing gear W/3" main wheels
1" tailwheel
REQUIRES: 3-4CH radio, 3 naro (micro or mini) servos, motor, ESC, Battery,
charger, servo extension, building & field equipment