GWSA1034     A10-EDF55-300H/D A10 Park Flyer EP ARF EDF55-300H Desert 

TECH NOTES

This is the GWS A-10 Thunder Bolt Ducted Fan
Airplane with two 300 Size Motors.
This aircraft is recommended for advanced fliers.
Also known as the "Warthog".

FEATURES: Construction: Desert (tan)  colored foam, fully scale appearance
Wings: One piece foam, low wing placement
Fan Shrouds: Foam 2-piece
Canopy: Single plastic
Cockpit Features: Included decals for detailing
Landing Gear: Pre-bent wire main and steerable nose gear
Wheels: Two ultra light style 2" (51mm) main wheels and one 1.5"
(38mm) nose wheel
Aileron Control: Single servo
Hardware: All necessary hardware included
Warranty: GWS guarantees this kit free from defects in
both materials and workmanship at the date of purchase.

INCLUDES: All foam fuselage, wings, and tail sections, 2 ultra-lite main wheels,
1 ultra-lite nose wheel, main and tailwheel wire, plastic ducted
fan units, foam fan shrouds, 2 300 size motors, Y-harness, photo-
illustrated instructions, all necessary hardware, decals, and tube
of glue

REQUIRES: Speed Control (20A)
Battery: 6N400mAH AA NiCd or 6-7N500-730mAh NiMH AAA
Charger: Timed or Peak
Radio: 4 Channel with micro receiver
Servos: 3 micro size (1-aileron, 1-elevator, 1-steerable nose gear)
Servo Extension 6": One, for ailerons
Misc items: Building and field equipment

SPECS:    Wingspan: 38.1" (968mm)
Wing Area: 216 sq in (13.95 sq dm)
Flying Weight: 14.6-16.37oz (414-464g)
Wing Loading: 8.46-9.64oz/sq ft (25.8 -29g/sq dm)
Length: 34.3" (872mm)
Center of Gravity: 2" - 2.2" (50-57mm) back from the wing's leading
edge at the fuselage sides.
Control Throws-           Low Rate        High Rate
Ailerons: Up & Down     .31"  (8mm)     .43" (11mm)
Elevator: Up & Down     .43" (11mm)     .51" (13mm)
Nose steering           .31"  (8mm)     .39" (10mm)

COMMENTS: GWS does not recommend exceeding 8.4V as this will cause permanent
damage to the motors.

ACCESSORIES

THIS IS THE ELECTRIC POWERED GWS A-10 DUCTED FAN AIRPLANE.
FEATURES: FOAM CONSTRUCTION, PREBENT MAIN & STEERABLE NOSE GEAR W/ULTRALITE
MAIN WHEELS, 2 DUCTED FAN UNITS, 2 300 SIZE MOTORS, Y-HARNESS
REQUIRES: 4-CHANNEL RADIO W/MICRO RECEIVER, 3 MICRO SERVOS, 6N400MAH AA NICD OR
6-7N500-730MAH NI-MH AAA BATTERY, SPEED CONTROL, BUILDING & FIELD EQUIP.