GWSA1042     GWAEO005K A10 Slope Glider Park Flyer EP ARF 

TECH NOTES

This is a A-10 Thunder Bolt, "Warthog" Slope Glider
from GWS
This kit was designed for intermediate to advanced modelers/fliers.
Recommended for modelers who have had trainer airplane experience and
also safely flown/landed low wing  planes.

FEATURES: Construction: Easy interlocking White foam
Wings: One-piece foam wing
Radio compartment: Molded into fuselage
Cowling: Foam motor shrouds
Canopy: Plastic
Cockpit features: Instrument panel decals included
Aileron Control: Single servo required
Hardware: All necessary hardware included
Warranty: Grand Wing Servo Company guarantees this kit free from
defects in both materials and workmanship at date of purchase.

INCLUDES: All foam fuselage halves, wing, and tail, three .9mm diameter push rods,
one plastic tube, two 3x240mm bamboo sticks, two aileron linkage
wires, one elevator linkage wire, GWS glue, all necessary hardware,
plastic cowl, decals and photo-illustrated instructions.

REQUIRES: Battery: For receiver
Charger: Timed or Peak
Radio: 3-4 Channel
Servos: 2 pico or naro size (micro or mini)
(1-aileron, 1-elevator)
Servo Extension 6": One (for ailerons)
Building and field equipment
Paint: Optional

SPECS:    Wingspan: 38.1" (968mm)
Wing Area: 216 sq in (13.95sq dm)
Weight: 12.7-14.6oz (360-410g)
Wing Loading: 8.46-9.64oz/sq ft (25.8-29g/sq dm)
Length: 34.3" (872mm)
Center of Gravity: 2"-2.2" (50-57mm) Back from the wing's leading
edge at the fuselage sides.
Control Throws-           Low Rate       High Rate
Ailerons: Up & Down       8mm           11mm
Elevator: Up & Down      11mm           13mm

COMMENTS: This is the slope glider version which does not include the motor,
props, landing gear or plastic fan shrouds.

ACCESSORIES

THIS IS THE RADIO CONTROLLED GWS A10-SG SLOPE GLIDER.
FEATURES: FOAM CONSTRUCTION, PLASTIC CANOPY, SINGLE AILERON SERVO CONTROL, 1
PIECE WING
REQUIRES: 3 CH RADIO W/2 MICRO OR MINI SIZE SERVOS, RECEIVER BATTERY,
BUILDING & FIELD EQUIPMENT