GWSA1050     BN2-EDP300H BN2 Park Flyer EP ARF w/2 EDP-300H 

TECH NOTES

This is a radio controlled, electric powered, foam construction
GWS BN2 ARF Model Airplane.
For Intermediate to Advanced Modelers/Fliers.

FEATURES: Construction: White foam
Wings: One-piece, foam construction
Radio Compartment: Foam construction
Cowling: Two White plastic cowlings
Landing Gear: Pre-bent wire landing gear (tricycle)
Hardware: Including pushrods, clevis, hinges etc.
Motor Mount: Motors are mounted directly to the cowlings using screws
Dual 300 size motors mounted under the wings
Wheels: 2" (51mm) plastic ultralight wheels (3)
Colorful decals to decorate the model

INCLUDES: Foam wing, tail section and wing, plastic cowlings, 2" wheels, foam
glue, pre-bent landing gear, two EM300H motors, two 5x4.3" props,
hardware package, decals and instruction manual.

REQUIRES: 4-channel radio with 3 nano servos and micro receiver   FUTJ37**
Speed Control/Auto-cut-off    GPMM2010
Battery 6 or 7 cell battery   GWSA7012
Charger required for above listed battery   GPMM3005
Servo Extension 6": One required   HCAM2000
Miscellaneous building and field equipment

SPECS:    Wingspan: 36.61" (930mm)
Wing Area: 208.5 sq in (13.5 sq dm)
Weight: Not listed
Wing loading: not listed
Length: 26.37" (670mm)
Airfoil:  flat bottom, high wing
Center of Gravity: 1.5" (40mm) Back from the wing's leading edge
at the fuselage sides.
Control Throws-         High Rate         Low Rate
Ailerons: Up & Down   .43" (11mm)      .31" (8mm)
Elevator: Up & Down    .51" (13mm)    .43" (11mm)
Rudder: Right & Left   .59" (15mm)    .47" (12mm)

ACCESSORIES

THE GWS BN2 ARF FEATURES FOAM CONSTRUCTION, DUAL 300 SIZE MOTORS, PLASTIC
COWLINGS, 2" ULTRALIGHT WHEELS, PRE-BENT WIRE LANDING GEAR, FOAM GLUE, DECALS,
MISCELLANEOUS HARDWARE, AND BUILDING INSTRUCTIONS MANUAL
REQUIRES 4-CHANNEL RADIO WITH 3 NANO SERVOS AND MICRO RECEVIER, 6 OR 7 CELL
BATTERY, CHARGER, SERVO EXTENSION, SPEED CONTROL, AND BUILDING EQUIPMENT