GWSA1053     FORMOSA-EPS350C Formosa Park Flyer EP ARF w/EPS350C/BB 

TECH NOTES

This is the GWS radio controlled Formosa with
the EPS350C/BB electric power system.
For Intermediate to Advanced Modelers/Fliers.
Recommended for modelers who have had trainer airplane experience and
also safely flown/landed mid-wing/high-wing planes.

FEATURES: Foam construction
Wings: One piece foam wing
Cowling: Plastic one piece
Canopy: Foam cockpit cover
Landing gear: Pre-bent wire main and tail gear(1.6mm main 1.2mm tail)
Hardware: All necessary hardware included.
Warranty: GWS warranties this kit free from defects in materials and
workmanship at the date of purchase.

INCLUDES: Foam wing, tail, and fuselage, plastic cowling, one EP1060 prop, one
EP9070 prop, one EPS350C with ball bearings motor and gear drive,
spinner, two 50.8mm ultra light wheel rims, one 25.4mm diameter
tail wheel, pre-bent main and tail gear wires, all necessary
hardware, GWS glue, decals and photo illustrated instructions.

REQUIRES:
Speed Control 20A
Battery 8.4V 400mAh NiCd,8.4-9.6V 730mAh NiMH AAA cells
Charger
Radio:   4-5 Channel with micro or naro receiver
Servos:   - 3 pico/naro/micro/or mini servos
(1-ailerons, 1-elevator, 1-rudder,)
Servo Extension 6": For ailerons
Misc. Items: 1/4" foam rubber padding, building and field equipment.

SPECS:    Wingspan:35.4"(900mm)
Wing Area:255.8 sq in (16.5 sq dm)
Flying Weight:12.7-14.8oz(360-420g)
Wing Loading:7.1-8.4oz/sq ft (21.8-25.5g/sq dm)
Length:35.9" (912mm)
Airfoil: Mid wing
Center of Gravity:90mm(+or-) Back from the wing's leading edge
at the fuselage sides.
Control Throws-           Low Rate       High Rate
Ailerons: Up & Down        2cm          3.5cm
Elevator: Up & Down        1.5cm        3.5cm
Rudder: Right & Left       3cm           5cm
Incidence-
Wing: N/A per manufacturer
Stabilizer: N/A per manufacturer

COMMENTS: GWS does not recommend exceeding battery voltage levels as this may
cause damage to the aircraft and will void the warranty.