Hot bodies, Powerhouse .26 Engine w/Recoil Savage/Light/

Hot Bodies

Hobbies R Us

Hot Bodies

R/C Airplanes

R/C Boats

R/C Cars

Engines

Engine Parts

Fuel

Click Here For Pricing & Stock Availability

HBS28501    Hot Bodies    Powerhouse .26 Engine w/Recoil Savage/Light/

TECH NOTES
               This is the .26 Powerhouse Engine by Hot Bodies.
       Fits HPI Savage .21, and the Hot Bodies Lightning series buggies
                      and popular .21 engined vehicles.

FEATURES: ABC construction
          6-Port sleeve
          Large Purple heat sink head
          Round port rear exhaust
          Pull-start
          3 needle slide valve carb
          SG (Pilot Shaft) style crankshaft
          Glow Plug included
          Brass collett included

INCLUDES: One .26 (4.26cc) sized engine with pull-start
           Instruction sheet

REQUIRES: Air filter depending on vehicle
          10%-30% Nitro Fuel with at least 18% lubricant
            Most of the fuels we carry meet or exceed the lubricant content
            required for optimum performance and maximum engine life. In the
            past, the conventional lubricant content used in fuel was 18%. But
            with new advanced technologies, fuels like Red Alert and O'Donnell
            for example, have a better quality of lubricants even though the
            percentages of lubricant content are lower. These high-tech
            lubricants provide exceptional cooling and protection.

SPECS:    Horsepower: 2.6HP @ 28,000 RPM
          Distance between mounting holes same side:              0.83"  (21mm)
          Distance between mounting holes opposite side:          1.5"   (38mm)
          Distance from pull starter to end of crankshaft:        4.6mm (116mm)
          Distance/center of crankcase to end of crankshaft:      3"     (76mm)
          Width between mounting ears:                            1.8"   (46mm)
          Height/bottom of mounting ears to top of cylinder head: 3.8" (97.5mm)
          Height/bottom of crankcase to top of cylinder head:     4.4"  (112mm)

          Factory Needle settings: High-Speed 3-1/2 turns
                                   Low-Speed  3-1/2 turns
                                   Midrange   3-1/4 turns
          Temp range: 210°F-275°F

COMMENTS: Although this engine has 3.5cc printed  on the side of the crankcase
            its displacement is 4.26cc.

ACCESSORIES
THIS IS THE HOT BODIES POWERHOUSE .26 CU IN (4.26CC) ENGINE WITH PULL-STARTER.
FEATURES: SLIDE VALVE CARB, ABC CONSTRUCTION, 6 PORT CYLINDER SLEEVE, REAR
  EXHAUST, GLOW PLUG, PURPLE ANODIZED CYLINDER HEAD, SG CRANKSHAFT, GREAT POWER
  UPGRADE FOR THE HPI SAVAGE .21, & HOT BODIES LIGHTNING SERIES
REQUIRES: 20% NITRO CAR FUEL, AIR FILTER, GLOW STARTER, & GLOW PLUG WRENCH