HCAA2210   Upstar 2M EP Glider ARF

TECH NOTES
This is the electric powered, radio controlled, almost ready to fly
Hobbico Upstar 2M Glider.
For Beginning Modeler/Flyers.

FEATURES:  Construction: Blow molded plastic fuselage
Wing: One-piece, constructed of balsa with built-in polyhedral for
increased stability, two plywood wing joiners, wings attach to
fuselage with rubber bands and are covered with high-quality heat
shrink film
Radio Compartment: Accessible under canopy and will accept standard
size servos
Canopy: Single, molded tinted plastic
Tail Design: Built-up balsa covered in high-quality heat shrink film
Motor: 540 size with pre-installed leads
Propeller: Hardened black plastic, two piece folding design
Spinner: 1-3/4" (45mm) diameter, plastic, black in color
Battery: 1800mAh 8-cell NiMH, 9.6V with Standard connector
Ready to fly in 3-4 hours
Warranty: Hobbico guarantees this kit to be free from defects in
both materials and workmanship at the date of purchase

INCLUDES: One Hobbico Upstar 2M glider with 540 size motor, folding propeller,
1800mAh battery pack, electronic speed control, pushrods,
hardware, illustrated manual, decals and rubber bands

REQUIRES: Radio: 3-channel with two standard servos
AA Batteries: Eight batteries for radio
Battery Charger: NiMH compatible, GPMM3001

SPECS:    Wingspan: 68" (1725mm)
Wing Area: 462 sq in (29.8 sq dm)
Weight: 2.75 lb (1247 g)
Wing Loading: 13.7 oz/sq ft (42 g/sq dm)
Center of Gravity (CG): 2-1/2 (64mm) back from leading edge of wing
at fuselage side
Control Throws;               High Rate          Low Rate
Elevator (Up and Down)   3/8" (10mm)        1/4" (6mm)
Rudder (Right and Left)  7/8" (22mm)        9/16" (14mm)

ACCESSORIES					

THIS IS THE ELECTRIC POWERED, RADIO CONTROLLED HOBBICO UPSTAR ARF 2M GLIDER.
FEATURES: PLASTIC FUSELAGE, BALSA WING, 540 MOTOR, SINGLE TINTED CANOPY,
FOLDING PROP, SOINNER SPEED CONTROL, 1800MAH 9.6V BATTERY
REQUIRES: 3-CH RADIO W/2 STANDARD SERVOS, 8AA CELLS, BATTERY CHARGER, BUILDING
& FIELD EQUIPMENT