|
Hobbico |
Hobbies R Us |
Hobbico |
|
|
HCAP0306 Hobbico Accu-Glo II Power Panel
TECH NOTES
This is the Hobbico Accu-Glo II Power Panel.
This panel powers starters, chargers, fuel pumps and
glow starters and monitors condition of glow plugs.
This power panel comes with a hard plastic case or can be mounted to any field
box with a standard sized cutout for a power panel.
**Additional Info Will be Added When It Becomes Available**
FEATURES: Fuel pump switch from original Accu-Glo was replaced by separate
color-coded push-buttons for "Fill" and "Empty" press once to
start, again to stop
Four LEDs, 11.0V, 11.5V, 12.0V, and 12.5V indicate field battery
condition-an improvement from one light that glowed either green or
red on original version
Glow Starter Charger keeps unit fully charged at a constant
300-400mA rate
Automatic Glow Power Management section tells when glow plug is fully
charged and if the plug continuity is good
Adjustment dial allows automatic glow heat customization to the
model; once set the unit maintains proper heat regardless of glow
plug's condition
INCLUDES: One Hobbico Accu-Glo II Power Panel
SPECS: Input Voltage: 11-13V DC
Input Voltage Indicators: four LEDs
Starter Jacks-Output Voltage: 12V DC
Fuel Pump Controls: yellow "FILL" pushbutton; red "EMPTY" pushbutton
Glow Heat Power Circuit: automatic heat adjustment
Glow Heat Status Indicators: "HOT" and "COLD" LEDs
Glow Heat Continuity Indicators: "GOOD and "BAD" LED's
Glow Starter Charger Current: 300-400mA constant current (not timed)
Glow Starter Output Jack: glow driver mounting lug with LED
Weight: 8.3oz (235g)
Dimensions: 6" x 3.7" (152 x 94mm)
REQUIRES: 12V battery, use HCAP0800
| Homepage | R/C Airplanes | Accessories | Batteries | Chargers | Covering | Decals | Electronic Speed Controls | Engines |
| Engine Mounts | Field Equipment | Fuel | Fuel Tanks | Glow Plugs | Glues | Landing Gears | Nuts/Bolts | Paint |
| Paint Supplies | Props | Push Rods | Radios | Simulators | Spinners | Tools | Wheels | Search |