HCAP0101   Hobbico   Tx/Rx Charge Leads No 9VAP Futaba J

TECH NOTES
           This is a Transmitter and Receiver Charging Lead Set for
           ALL Futaba Radio Systems EXCEPT for the 9VAP/9VHP Radios.

             These Hobbico Charge Leads Make it Easy to Use the
        Hobbico R/C Multi-Charger, Accu Cycles, or the Scale Voltmeter.

FEATURES: Includes Both Transmitter and Receiver Leads w/Banana Plugs. They
            plug directly into charging outlets (no soldering, crimping or
            splicing plugs onto wires).
          Plugs for All Futaba J Radios (but NOT for 9VAP/VHP, use HCAP0102 )
          Will work with other brands of chargers or voltmeters using banana
            plug outputs.

INCLUDES: One 1 meter long Transmitter Charge Cord w/Banana Plugs
          One 1 meter long Receiver Charge Cord w/Banana Plugs

COMMENTS: For voltmeter use, these plugs will work only with the 4NBL
            and older "J" Series Radios (because of diode protection).
          May also be used with the 5 or 7 Channel Radios, but it will require
            a 9 volt connector (purchased at Radio Shack).
                                                                     

|  Homepage  |  Batteries  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |