HMXM3000 Brushless ESC 25Amp 

TECH NOTES
        This is the Heli-Max 25amp Brushless Electronic Speed Control
                   for use with electric helicopters.
  It is a perfect match for the Heli-Max MX400 Heli using the 6-pole motor.

FEATURES: High Efficiency
          Low Weight
          Compact Size
          Automatic cut-off
          Auto-detection of all types and number of cells
          Over Temperature protection
          Brake non-active/active setting allowing for hard start or
            soft start modes
          Universal radio connector for use with Futaba, JR, Hitec & Airtronics

INCLUDES: One 25amp Brushless Electronic Speed Control
          One instruction sheet

REQUIRES: Male & Female Bullet connectors for brushless motor hook-up
          One Battery Connector

SPECS:    Length:                       1.5"  (38mm)
          Width:                       0.95"  (24mm)
          Thickness:                   0.24"   (6mm)
          Motor wire lead length:         4" (102mm)  (18awg wire)
          Battery wire lead length:     3.5"  (89mm)  (16awg wire)
          Radio wire lead length:       9.5" (241mm)
          Amount of cells(NiCd/NiMH):   6-10 cells
          Amount of cells(Li-po):        2-3 cells
          Max current:                    25 amps

COMMENTS: When using this speed control with the Heli-Max MX400 helicopter
            and the Heli-Max 6-pole motor, the following connectors are
            needed for battery and motor connections:

              -GPMM3110 & GPMM3111: for motor connectors
              -WSDM1302: for battery connector when using the recommended
                 Lithium battery(KKMP3005).

          Note: Bullet connectors are not needed when using the Heli-Max
                  12-pole brushless motor(HMXG1002). They are included
                  with the 12-pole motor.

|  Homepage  |  Batteries  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |