HPI10705    RTR E10 Skyline R32 GT-R

TECH NOTES

This is the 1/10 scale electric powered, radio controlled, ready to run
HPI E10 on-road Nissan Skyline R32 GT-R Touring Car.

FEATURES: Chassis: Bathtub type .78" (20mm) thick with quick change battery
holder and adjustable motor and radio equipment positions to
easily convert from street/touring to drift driving with no extra
parts to buy
Drive: Four wheel shaft
Radio: HPI TF-1 AM pistol grip radio system with RF-1 receiver, SF-
1 steering servo
Electronic Speed Control: EN-1 with reverse
Motor HPI Saturn 27T 540 size, HPIC1144
Charger: AC 120V wall type
Battery: 7.2V 1500mAh 6-cell stick pack with Standard connector
Shocks: Aluminum threaded shocks
Gearboxes: Closed
Differentials: Front and Rear bevel-type
Transmission: Single-speed
Tires: T-Drift 2.48" (63mm) diameter, 1.02" (26mm) wide
Wheels: Six spoke, chrome Gram Lights 57S-Pro
2.08" (53mm) diameter, 1.02" (26mm) wide
Bumpers: Front, foam
Body: Pre-painted Nissan Skyline R32 GT-R body, ajustable body mounts
to accomodate a large variety of touring car bodies
Suspension: Full-time independent
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Non-adjustable, camber refers to the angle of the tops
of the tires from vertical when viewed from front or behind vehicle
Steering: Bell-crank type with servo saver

INCLUDES: HPI E10 on-road Nissan Skyline R32 GT-R Touring Car with painted
body, radio, ESC, battery, charger, wheels, tires, 27T motor
and manual                                                        _

REQUIRES: Radio Batteries: (8) AA size
Misc. Items: Building and track equipment

SPECS:      VEHICLE-
Length:     14.8" (375mm)
Width, Adjustable: 7.32, 7.56, 7.80" (186, 192, 198mm)
Height: 5.25" (133.35mm)
Weight:   2.8 lbs (1270g) without body
Wheelbase:    10" (255mm)
Drive Ratio: 7.48:1
Tread: Front-6.5" (165mm)   (side-to-side at wheel centers)
Rear - 6.8" (173mm)
Front Track: 7.5" (190mm)
Rear Track: 7.75" (197mm)
Spur Gear: 65T
Tires- Front and rear: 2.48" x 1.02 " (63 x 26mm)
BODY-
Length: 8" (203.2mm)
Width: 8" (203.2mm) at rear wheels (widest point)
7.75" (196.85mm) behind from wheels (thinnest point)
Height: 5" (127mm)

COMMENTS: For Replacement Ball Bearings use:
Qty.  Size      Location                Bearing Set Qty.
2   12X18X4    Center drive shaft      DTXC1597    1

Body pictured on the box is painted silver
For the assembled version without battery or radio, order HPIC2763.

ACCESSORIES

THIS IS THE RTR HPI E10 SKYLINE R32 GT-R ON-ROAD TOURING CAR.
FEATURES: 27T 540 SIZE MOTOR, 4 WHEEL SHAFT DRIVE, TRIMMED AND PAINTED BODY,
CHARGER, 1500MAH BATTERY, FRONT & REAR BEVEL-TYPE DIFFERENTIALS, 2-CH AM
RADIO, ESC W/REVERSE, T-DRIFT TIRES W/ SIX SPOKE WHEELS, BELL-CRANK STEERING.
REQUIRES: 8 AA BATTERIES, BUILDING & TRACK EQUIPMENT

 |  On-Road Nitro  |  Off-Road Nitro   |   On-Road Electric  |  Off-Road Electric  |  Search  |