HPI10830   Wheely King 4WD RTR

TECH NOTES
   This is the 1/12 scale, electric powered, radio controlled, ready-to-run
                HPI Wheely King Four Wheel Drive Monster Truck.

   **Additional Technical Info Will Be Added When It Becomes Available.**

FEATURES: Chassis: TVP (Twin Vertical Plate) plastic tube frame design with
            rear wheelie bar
          Drive: Four wheel shaft drive
          Motor: 540 size 27 turn
          Radio: HPI TF-1 27MHz AM 2-channel pistol grip with steering and
            throttle trim and reverse, one standard steering servo and HPI
            reversible speed control
          Battery: 7.2V, 1500mAh NiCd 6-cell stick pack with standard connector
          Battery Charger: 120V wall type, charges in six hours
          Ball Bearings: Full set included
          Shocks: Four plastic bodied
          Transmission: Single speed
          Suspension: Front and rear solid axles with pivot arms, 6" (152mm) of
            suspension travel for all-terrain driving
          Wheels: Chrome 2" (51mm) diameter, 2.2" (56mm) wide
          Tires: 5.3" (135mm) diameter, 2.75" (70mm) wide Mud Thrasher
          Body: Prepainted and trimmed with decals
          Caster: Non-adjustable
          Camber: Non-adjustable
          Warranty: Two year

INCLUDES: HPI Wheely King 4WD Monster Truck with motor, painted body, AM radio,
            ESC 27T motor, 90T spur gear, 21T pinion gear, 6-cell stick pack,
            wall charger, instructions

REQUIRES: AA Batteries: 8 for transmitter

SPECS:      VEHICLE-
          Length: 17"   (432mm)
          Width:  11.7" (297mm)
          Height: 10"   (254mm)
          Weight:  4.4lb  (2015g)
          Wheelbase: 9.4" (239mm)
          Front and Rear Tread: 9.1" (231mm) side-to-side at wheel centers
          Front and Rear Track: 11.5" (292mm) side to side at outer edges of
            wheel
          Ground Clearance: 2.2" (55mm) at lowest point
          Suspension Travel: 6" (152mm)
            BODY-
          Length: 15.3" (390mm)
          Width:   5.9" (150mm) ahead of front wheels narrowest point
          Width:   6.5" (165mm)
          Height:  4.3" (109mm)_

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                 Qty.  Bearing Set
             4   5x11mm    Front Wheels               2    DTXC1547
             4   5x11mm    Rear Wheels                2    DTXC1547
             4   5x11mm    Gearbox                    2    DTXC1547
             2   10x15mm   Gearbox                    1    DTXC1595
          The Wheely King is available on the following radio channels;
            A1   HPID83A1
            A2   HPID83A2
            A3   HPID83A3
            A4   HPID83A4
            A5   HPID83A5
            A6   HPID83A6

          Also available in two wheel drive version, HPIC1082.