HPI10065   Nitro RS43 18SS+ Kit 1968 Camaro

TECH NOTES
            This is the 1/10 scale glow powered, radio controlled,
       HPI Nitro RS4 3 18SS+ on-road car kit with the 1968 Camaro body.

    **Additional Technical Info Will Be Added When It Becomes Available.**

FEATURES: Chassis: 0.098" (2.5mm) thick anodized aluminum, purple in color
          Drive: Four wheel shaft drive
          Engine: Nitro Star .18R SS (2.9cc) 1.5hp with pull-starter, (can be
            bump started in racing applications) ABC cylinder and liner
            construction-"A"luminum piston, "B"rass cylinder liner that is
            "C"hrome plated, lightweight aluminum con rod, 2 needle 6mm rotary
            carburetor, 2 stage air filter
          Exhaust: Dual chamber aluminum tuned pipe, black in color
          Fuel Tank: 2.53oz (75cc), flip top cap
          Clutch: 2-shoe
          Transmission: Two-speed
          Ball Bearings: 18 rubber sealed
          Shocks: Four oil-filled, with coil-over spring
          Main Gear:
          Clutch bell:
          Gearbox: Sealed, front and rear
          Differentials: Sealed, with metal bevel gears, limited slip front
            differential
          Brakes: single disc, fiber construction
          Tires:
          Wheels: Silver matte finish, five spoke vintage design
          Body: Clear 1968 Chevy Camaro with decals, overspray film, window
            and racing wing
          Bumpers: Front foam
          Suspension: Four wheel independent
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering: Bellcrank
          Servo Saver: Included

INCLUDES: HPI RS4 3 18SS Camaro with oil-filled shocks, .18 engine, clear
           polycarbonate body, tires, foam inserts, silver wheels, 19/23 tooth,
           43/47 tooth spur gear, clear body, decals and instructions

REQUIRES: Radio: 2-Channel with 2 Servos
           (High torque servo for steering recommended but not required)
          Radio Batteries: 12 AA size
          Glow Starter: 1.2V
          Paint: For polycarbonate bodies
          Misc. Items: Fuel bottle, building and track equipment
          Fuel: 2-stroke glow fuel with 10%-15% nitromethane, 16% lubricant-
            Most of the fuels we carry meet or exceed the lubricant content
            required for optimum performance and maximum engine life. In the
            past, the conventional lubricant content used in fuel was 18%. But
            with new advanced technologies, fuels like Red Alert and O'Donnell
            for example, have a better quality of lubricants even though the
            percentages of lubricant content are lower. These high-tech
            lubricants provide exceptional cooling and protection.

SPECS:      Vehicle-
          Length:
          Width:
          Height:
          Weight:
          Wheelbase:
          Tread: Front---" (---mm) Rear--" (---mm) (wheels on-center side
            to-side)
          Front Track:
          Rear Track:
          Ground Clearance:
            Body-
          Length:
          Width:

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size       Location                    Bearing Set Qty.
            (2)  10 x 15mm  spur gear shaft             (use 1-DTXC1595)
            (4)   5 x 11mm  front & rear gearbox        (use 2-DTXC1547)
            (4)  10 x 15mm  front & rear gearbox        (use 2-DTXC1595)
            (2)   5 x 11mm  front wheel hubs            (use 1-DTXC1547)
            (2)  10 x 15mm  front wheel hubs            (use 1-DTXC1595)
            (4)   5 x 11mm  rear wheel hubs             (use 2-DTXC1547)
            (2)   5 x 10mm  clutch bell                 (use 1-DTXC1535)

ACCESSORIES
  THIS IS THE HPI RS4 3 18SS+ 1/10 SCALE ON-ROAD CAR WITH 1968 CAMARO BODY.
FEATURES: .18 CU IN (2.9CC) PULL START ENGINE, 2 SPEED TRANSMISSION, 4 WHEEL
 SHAFT DRIVE, X PATTERN RADIAL TIRES, HEAVY DUTY OUTDRIVES, FIBER DISC BRAKE
 0.098" (2.5MM) THICK ALUMINUM CHASSIS, COMPOSITE TUNED PIPE, CLEAR BODY
REQUIRES: 2CH RADIO W/2 SERVOS, FUEL, GLOW STARTER, PAINT, TRACK EQUIPMENT

|  On-Road Nitro  |  Off-Road Nitro   |   On-Road Electric  |  Off-Road Electric  |  Search  |