HPI
Nitro Vehicles

Hobbies R Us

HPI
Nitro Vehicles

 



HomePage

R/c Airplanes

R/c Boats

R/c Cars

 Nitro  On-Road Cars

Nitro Off-Road Cars

 Electric On-Road

Electric Off- Road



 

Click Here For Pricing & Stock Availability

HPI10600   1/5 Baja 5B Buggy RTR
TECH NOTES
           This is the 1/5 scale, gasoline powered, radio controlled,
                    HPI Baja 5B Ready to Run Off-Road Buggy.

    **Additional Technical Info Will Be Added When It Becomes Available.**

FEATURES: Chassis: Narrow channel aluminum 0.16" (4mm) thick, purple in color
          Drive: Four wheel shaft drive
          Engine: 1.40 cu in (23cc) gasoline with pull starter, dual element
            foam air filter, primer choke and kill switch
          Exhaust:
          Fuel Tank:
          Radio: TF-10 FM                     receiver has adjustable failsafe,
            6V 2000mAh rechargeable receiver pack, AC charger
            water resistant housing on chassis with external charging jack and
            rubber cap for easy crystal changes
          Servos: Water resistant with high torque 25kg-cm steering servo
          Clutch:
          Transmission:
          Ball Bearings: Full set included
          Shocks: Four Hyper Adjust Piston aluminum shocks with 5 externally
            adjustable dampening settings and dual rate springs for
            progressive dampening action on all surfaces
          Main Gear:      tooth
          Gearbox: Front and rear sealed
          Differentials: Viscous Torque Control can be tuned using different
            weight diff oils, hardened metal gears
          Brakes:
          Tires: HPI Dirt Buster with different tread pattern for front and
            rear
          Wheels: 3-piece bead lock, bead is bolted to wheel to hold tire
            securely in place-no need for tire glue
          Body: Pre-painted buggy type with rear wing
          Roll Cage: Baja style high impact nylon protects engine and body
            from crash damage
          Bumpers:
          Suspension: Fully adjustable, double wishbone
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle

          Steering:
          Servo Saver:

INCLUDES:

REQUIRES: Unleaded gasoline and 2-cycle oil
          Misc. Items: Building and track equipment

SPECS:      Vehicle-
          Length:            . " (   mm)
          Width:             . " (   mm)
          Height:            . " (   mm)
          Weight:         .  lbs (    g)(approx.)
          Wheelbase:           " (   mm)  (wheels on-center front-to-rear)
          Tread- Front-       Rear-       (wheels on-center side-to-side)
          Front Track:       . " (   mm)
          Rear Track:        . " (   mm)
          Ground Clearance:  . " (   mm)
          Gear Ratio:          .  :1
          Tires- Front:        " x  . " (  x  mm)
                  Rear:        " x  . " (  x  mm)
            Body-
          Length:  - / " (   mm)
          Width:   - / " (   mm) at rear wheels (widest point)
                   - / " (   mm) behind from wheels (thinnest point)
          Height:  - / " (   mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                      Bearing Set Qty.

          Body pictured on the box is painted orange and yellow.


  On-Road Nitro  |  Off-Road Nitro   |   On-Road Electric  |  Off-Road Electric  |  Search  |