|
HPI Engines |
Hobbies R Us |
HPI Engines |
HPI1406 HPI Nitro Star S-25 w/Pullstart
TECH NOTES
This is HPI's Nitro Star S-25 Engine With Pullstart.
This is the standard engine for the Savage 25 and the Savage SS
monster trucks.
FEATURES: Slide valve carb with flat-head screwdriver adjustment on needle
valve
ABC cylinder construction
Purple anodized head
Rear exhaust round port
Flowed and counterbalanced crankshaft
Machined pilot shaft crankshaft with collet preinstalled
Knive-edged billet aluminum connecting rod with dual bushings.
INCLUDES: Nitro Star .25 (4.0) glow engine
Glow Plug
Air filter and replacement element
Instructions
Parts breakdown
Decals
SPECS: Crankcase: 3.32" (from rear of case to front without shaft)
Height: 4.41" (from bottom of case to the top of the head)
Width: 1.81" (mount flange)
Mount Holes: 1.42" (measured from center to center width)
Mount holes: .82" (Between holes front and back)
RPM: Over 38,000 RPM
Horsepower: 2.5 @29000 RPM
Crankshaft diameter: 5mm (clutch bell area)
Crankshaft diameter: 6.7mm (threaded portion)
Crankshaft screw: 3 x 12mm caphead screw
Capacity: 4.09cc (.25)
REQUIRES: Glow fuel
Glow starter
Vehicle requiring a rear exhaust .25 engine.
Tuned pipe
Manifold
Air cleaner
ACCESSORIES
THIS IS AN HPI NITRO STAR S-25 ENGINE WITH PULLSTART.
INCLUDES: AIR FILTER, GLOW PLUG, ABC CONSTRUCTION, DUAL NEEDLE 7MM COMPOSITE
CARB, FLOWED & COUNTERBALANCED CRANKSHAFT, BILLET ALUMINUM HEATSINK HEAD
REQUIRES: FUEL, IGNITER AND VEHICLE THAT CAN ACCEPT A .25 REAR EXHAUST
PULLSTART ENGINE
|
Homepage |
R/C Cars |
Batteries |
Bearings |
Body Accessories |
Books & Simulators |
| Chargers
| Decals
| Electronic Speed Controls
| Engines |
Engine Parts | Fuel |
Glow Plugs | Glue
|
| Supplies & Accessories
| Hobby Supplies
| Lexan Bodies
| Motors Electric
| Nuts & Bolts
|
| Paint, Lexan
| Radios |
Radio Accessories
| Servos
| Tires & Wheels
|
| Tools
| Tools Specialized
| Search |