Hitec/RCD
Servos

Hobbies R Us

Hitec/RCD
Servos

 

 

HomePage

R/c Airplanes

R/c Boats

R/c Cars

Flight Packs

Radio's

Radio Accessories

Receivers

                                                                   



Click Here For Pricing & Stock Availability

HRCM0625   Hitec   HS-5625MG Servo Metal Gear Universal
TECH NOTES
     This is a Hitec Digital, Super Speed, Metal Gear, Programmable Servo
       that will work with Hitec S, JR, and Airtronics-Z radio systems.

FEATURES: EPA, Speed, Direction, and Fail-Safe Programmable (see COMMENTS).
          MOS-FET amplifier.
          Gold plated contacts.
          Three metal gears
          Dual ball bearings.
          Indirect drive long life potentiometer.
          High standing torque.
          Watertight and dustproof.
          Includes blue aluminum, heat-treated servo arm (see COMMENTS).
          Works with fixed winged aircraft and helicopters up to 40 pounds,
            1/10th and 1/8th on- or off-road vehicles.

INCLUDES: One digital high torque servo with 12" wire and S/JR/Air-Z connector
          One white small X-shaped servo horn.
          One red Large X-shaped servo horn.
          One white adjustable servo horn.
          One white off-set straight servo horn.
          One white disc servo horn.
          One blue aluminum, heat-treated servo arm horn.
          Four 2 x 14mm mounting screws
          Four brass eyelets
          Four black rubber vibration isolators.

REQUIRES: Hitec, JR and Airtronics-Z radio system

SPECS:    Speed: 0.17 sec/60 degrees at 4.8v
          Speed: 0.14 sec/60 degrees at 6.0v
          Torque: 109.7 oz/in at 4.8v
          Torque: 130.53 oz/in at 6.0v
          Length:  1.59" (40.6mm)
          Width:   0.77" (19.8mm)
          Height:  1.48" (37.8mm)
          Weight:  2.11oz (60g)

COMMENTS: Programming the failsafe:
            In order to program the Fail-Safe on this servo.  Modeler will need
            to purchase the Hitec field programmer sold separately (Not carried
            at the time of writing).
          The metal servo horn will fit any Hitec servos that have a "+"
            stamped on top of the output shaft.
                                                                    

|  Homepage  |  Batteries  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |