HRCM0945   HS-945MG Servo Ultra Torque Metal Gear Universal 

TECH NOTES

This is a Hitec Digital, High Torque, Metal Gear, Programmable Servo
that will work with Futaba J, Hitec S, JR, and Airtronics Z radio systems.

FEATURES: EPA, Speed Directional and Fail-Safe Programmable (see COMMENTS).
MOSFET amplifier.
Coreless motor.
Gold plated contacts.
Three metal gears
Dual ball bearings.
Indirect drive long life potentiometer.
High standing torque.
Watertight and dustproof.
Works with any aircraft up to 1/4 scale.
30 size and Larger Helicopter.
1/10th and 1/8th on- or off-road vehicles.

INCLUDES: One digital high torque servo with 12" wire and S/JR connector.
One aluminum servo arm
One white small X-shaped servo horn.
One red Large X-shaped servo horn.
One white adjustable servo horn.
One white off-set straight servo horn.
One white disc servo horn.
Four 2 x 14mm mounting screws
Four brass eyelets
Four black rubber vibration isolators.

REQUIRES: Futaba J, Hitec, JR or Airtronics Z radio system

SPECS:    Speed: 0.16 sec/60 degrees at 4.8V
Speed: 0.13 sec/60 degrees at 6.0V
Torque: 152.75 oz-in at 4.8V (9.6 kg-cm)
Torque: 180.53 oz-in at 6.0V (11.4 kg-cm)
Length:  1.55" (39.4mm)
Width:   0.78" (20mm)
Height:  1.48" (37.8mm)
Weight: 1.97oz (56g)
COMMENTS: Programming the failsafe:
In order to program the Fail-Safe on this servo. Modeler will need
to purchase the Hitec field programmer sold separately, HRCM4410.

|  Homepage  |  Batteries  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |