HRCM1312   Hitec   HS-311 Servo Standard Universal

TECH NOTES
     This is a Hitec servo that will work with Hitec or JR radios systems..

FEATURES: Heavy-duty resin gear train
          Nylon bushing
          3 pole ferrite motor

INCLUDES: One Deluxe Standard servo with nylon bushing.
          One white small X-shaped servo horn.
          One white adjustable servo horn.
          One white off-set straight servo horn.
          One red X-shaped heavy-duty servo horn.
          Four brass eyelets.
          One white plastic wheel servo horn.
          Four black rubber vibration isolators.
          Four 2 x 14mm mounting screws

REQUIRES: S/JR plug compatible radio system

SPECS:    Speed: 0.19 sec/60 degrees at 4.8v
          Speed: 0.15 sec/60 degrees at 6.0v
          Torque: 42.00 oz/in at 4.8v
          Torque: 51.00 oz/in at 6.0v
          Length:  1.60" (41mm)
          Width:   0.80" (20mm)
          Height:  1.40" (37mm)
          Weight:  1.5oz (43g)
                                                                   
COMMENTS: Gear set: HRCM6325                                              
          Horn set: HRCM6315
          Case set: HRCM5404

NOTE: This is a non-ball bearing servo. The difference between this servo and
      HRCM1311 is the connector.

|  Homepage  |  Batteries  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |