HRCM1360   HS-635HB Hi Torq Karbonite Gear Universal

TECH NOTES
This is the Hitec HS-635HB High Torque Standard Servo with the
Futaba J, Hitec/JR/Z connector.
This general purpose servo may be used in sport and high performance
aircraft up to 12 pounds (5.4kg).

FEATURES: Replaces the 605BB and offers improved centering and resolution
Gears are constructed of Karbonite which is up to four times stronger
than standard nylon gears
Dual ball bearings
Three-pole ferrite motor

INCLUDES: One Hitec High Torque Standard Servo with Hitec/JR/Z type connector
one 1.7" (44mm) diameter 4 point servo horn, one 1.8" (45mm)
diameter round servo horn, one 2.3" (59mm) long 2 point servo horn,
one 1.3" (32mm) 1 point servo horn, 4 rubber grommets, 4 eyelets,
four 2mm x 15mm phillips head mounting screws

REQUIRES: Installing in model and connecting to receiver

SPECS:             4.8V                 6V
Torque: 69 oz-in (5.5 kg-cm)  83 oz-in (6 kg-cm)
Speed:  0.18                 0.15
Weight  1.83oz (52.1g)
Length: 1.6" (40mm)
Width:  0.8" (20mm)
Height: 1.5" (39mm)

COMMENTS: For replacement case, order HRCM5411.
For replacement gear set, order HRCM5006.

|  Homepage  |  Batteries  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |