KYOCA3067   Kyosho   Tail Rotor Grip Caliber 30

TECH NOTES
 These are the Tail Rotor Grips for the Kyosho Caliber 30 Helicopter (KYOE0250)
                 and the Caliber 30 with Engine (KYOE0252).
              These Grips attach to the Tail Rotors (KYOE3268)
              and fasten around the Tail Center Hub (KYOE3266).

FEATURES: Constructed of plastic.

INCLUDES: Two Tail Rotor Grips (four pieces total) for the Kyosho Caliber
            30 Helicopter with two 3mm x 15mm socket head cap screws, two
            2.5mm locknuts, four 2mm x 8mm phillips head screws, four 2mm nuts.

REQUIRES: Disassembly of tail center hub to install.
          2mm hex wrench, can use GPMR8011

COMMENTS: These grips will only work with the Kyosho Caliber 30 Helicopter.

|  Homepage  |  Batteries  |  Crystals  |  Flight Packs  |  Radio Accessories  |  Radio's  |  Receivers  |  Servo's  |   Search  |