MASMA1260T   Master Airscrew   12x6 3-Blade Propeller

TECH NOTES
    Master Airscrew Injection Molded Fiberglass Filled Nylon Propellers are
           Excellent for any Type of Application, from Training and
                  Sport Flying to Serious Competition.

FEATURES: Factory Balanced 3-Bladed Props have NASA airfoils and hold a
            true pitch.
          They have been accurately balanced and create a greater thrust
            at a lower RPM's.
          This particular prop is glass-filled nylon as opposed to a wooden
            prop.

INCLUDES: One 12 x 6 glass-filled nylon 3-bladed propeller

SPECS:    Diameter: 12"
          Pitch:  6"

COMMENTS: The general rule for converting a 2 blade prop to a 3 blade is
            subtract 1" from Diameter OR subtract 1 from the Pitch.
                                                                          ir/jl
PER MASTER AIRSCREW: All 3- and 4- blades props are balanced dynamically at the
 factory prior to drilling. The mounting holes are then drilled slightly off
center, if required, to properly balance the propeller. As such, your mounting
hole may be slightly off center. Master Airscrew assures us this is perfectly
normal and will not cause any problems during usage.

|  Homepage  |  R/C Airplanes  |  Accessories  |  Batteries  |   Chargers  |  Covering  |  Decals  |  Electronic Speed Controls  |  Engines  |

|  Engine Mounts  |  Field Equipment  |  Fuel  |  Fuel Tanks  |  Glow Plugs  |  Glues  |  Landing Gears  |  Nuts/Bolts  |  Paint  |  

|  Paint Supplies  |  Props  |  Push Rods  |  Radios  |  Simulators  |  Spinners  |  Tools  |  Wheels  |  Search  |