MID41-4   Midwest   Primer 3.5 oz. 

TECH NOTES
     This is a 3.5 oz bottle of Pactra Prep Primer/Surfacer from Midwest.

FEATURES: Pactra Prep is a lacquer-base, light gray, and easily-sanded primer.
          Provides superior adhesion to most model surfaces and produces a
            smooth base for the topcoat of Aero Gloss, Formula-U or other
            other brands of paint.
          Can be applied over bare balsa, plywood, fiberglass, most plastics,
            metal, tissue, silkspan, silk, polyester, and heat-shrink plastic
            film coverings such as MonoKote or similar brands.  Use on surfaces
            that are relatively smooth and free of flaws, and requiring little
            or no filling.  Recommended for use on Plastic Cowl/Wheel Pants,
            Fiberglass Fuselages and Radio Controlled Boat Hulls.
          Dry time of 30 minutes before sanding and 1-2 hours between coats.
          Dry time of 72 hours before applying a top coat of paint.
          Use on surface temperatures of 70 degrees F.
          Contains no lead.

INCLUDES: One 3.5 oz glass bottle of Pactra Prep Primer/Surfacer

REQUIRES: Eye, lung and skin protection.
          Clean all equipment with Aero Gloss Thinner,
            lacquer thinner or acetone.

SPECS:    Fluid Ounce: 3.5 oz (103.5 mL)

COMMENTS: Caution: Contains n-butyl acetate, toluol and methyl ethyl ketone.
            Keep away from heat and flame.  Vapor harmful.  Harmful if
            swallowed.  Avoid eye and prolonged skin contact.
          As with any type of painting procedure, always test for compatibility
            of materials on a scrap piece before attempting to paint model.
          How to use:  1. Surface to be coated must be clean, dry and free from
            oil, mold release, wax, silicone, dust or other foreign matter.
            2. Apply with a brush, airbrush or use the spray version.  If
            airbrushing, thin 1 part Prep Primer with 1 part Aero-Gloss thinner
            and air pressure of 25-35 psi at the airbrush.
            3. Allow to dry 30 minutes before sanding, 72 hours before top-
            coating.
                                                                    

|  Homepage  |  R/C Airplanes  |  Accessories  |  Batteries  |   Chargers  |  Covering  |  Decals  |  Electronic Speed Controls  |  Engines  |

|  Engine Mounts  |  Field Equipment  |  Fuel  |  Fuel Tanks  |  Glow Plugs  |  Glues  |  Landing Gears  |  Nuts/Bolts  |  Paint  |  

|  Paint Supplies  |  Props  |  Push Rods  |  Radios  |  Simulators  |  Spinners  |  Tools  |  Wheels  |  Search  |