Midwest, Aerogloss 1 oz. Sanding Sealer

Midwest
(Pactra)

Hobbies R Us

Midwest
(Pactra)

R/C Airplanes

R/C Boats

R/C Cars

Fuel Proof Paint

Hobby Supplies

Paint & Supplies

Click Here For Pricing & Stock Availability

MID71-1   Midwest   Aerogloss 1 oz. Sanding Sealer

TECH NOTES
                       This is a 1 oz glass jar of
                    Sanding Sealer Primer from Midwest.
    The original hot fuel proof butyrate dope system which gives a durable,
          fast-drying, lightweight and beautiful lacquer-type finish.

FEATURES: Use over raw wood to seal grain.  Dries clear.
          Used for Tissue Covered Airplane Models, Control Line Airplane Models,
            R/C Airplane and Boat Models, Wood Scouting Projects and Model
            Rockets.
          For use on paper, fabric coverings, balsa and basswood.
          Contains no lead.

INCLUDES: One 1 oz Glass Jar of Sanding Sealer Primer

REQUIRES: Use in a well ventilated area with lung, eye and skin protection.
          Brush to apply Sanding Sealer to the model.
          Aero-Gloss Thinner (MIDR7643) for clean-up.

SPECS:    Fluid Ounce: 1 oz (29.5 mL)
          Fuel Proof: No, Do Not use as a final coat.

COMMENTS: Flammable: Contains toluol and methyl ethyl keytone.
          As with any type of painting procedure, always test for compatibility
            of materials on a scrap piece before attempting to paint model.
          For best results:  1. Sand entire model until smooth surface is
            obtained by using progressively coarse to fine sandpaper.
            2. Fill in any surface irregularities with Aero-Gloss Balsa
            Fillercoat Primer.
            3. Stir Sanding Sealer thoroughly.  Apply as many coats as required
            with a full brush to obtain smooth surface.  Sand between coats
            using tack rag to wipe away dust.
            4. Dry 72 hours before paint application.  Topcoat Sanding Sealer
            with Formula U or Aero-Gloss Dopes.