O.S. ENGINES, .15 CV-X W/PS LONG CRANK

Hobbies R Us

Click Here For Pricing & Stock Availability

OSMG2034   O.S.   .15 CV-X w/Recoil

TECH NOTES
           This is the OS Max .15CV-X Pull Start RC Car/Buggy Engine.
     It has the Same Mounting and Muffler Dimensions as the .12CV and CZ-R.
               ****  Now comes with the recoil OSMG8978 ******

FEATURES: Unique Blue, "Heat Vent" Squared, Diagonal Slotted Cylinder Head
          Charcoal Gray Finned Crankcase
          Rotatable Carburetor Secured to Crankcase by Pinch Bolt
          New #10E Rotary (not slide valve) Carburetor w/Dual Needle for High
            and Low Speed, Idle Adjustment & Screwdriver Adjusted Needle Valve
          Front and Rear Ball Bearings
          Side Exhaust
          Can be converted into a .15CVX-DF (See Comments)
          2-Year Warranty

INCLUDES: One Assembled .15 CV Pull Start Engine
          One Super 102 Air Cleaner
          Three Blue Foam Elements
          Four 3x14mm Phillips-Head Round Head Screws
          Two L:20mm, W:6mm, H:4mm Engine Mount Spacers (OSMG2748)
          One Set of Instructions w/Parts List and Decal Sheet
          One #A3 Glow Plug (OSMG2690)

SPECS:    Displacement:  2.49cc (0.152 cu in)
          Weight: 264g (9.32oz)
          Bore: 15.2mm (0.598")
          Stroke: 13.7mm (0.539")
          Power Output:  0.68 bhp / 29,000 rpm
          Practical RPM: 3,000-30,000
          Crankshaft Thread: 5mm
          On-Center Mounting Holes, Front to Rear:  11mmm
          On-Center Mounting Holes, Side to Side: 31.4mmm
          On-Center Exhaust Mounting Holes:        27.5mm
          Back of Engine to Front of Drive Washer: 74.7mm (2-15/16")
          Engine Height:  84mm (3-9/32")

REQUIRES: Fuel with at least 18% lubricant and 10%-20% nitro
            (Most of the 5%-15% fuel we carry meet this requirement)
          Muffler (exhaust system) depending on vehicle

COMMENTS: Also available OSMG2032 .15CV without Pull Starter.

        To convert this engine into at .15CVX-DF for Ducted Fan airplanes, the
          customer would need to purchase this engine along with the Heat Sink
          Head (OSMG5181) and the #2F Carb (OSMG2415)
         (The CVXDF comes in the Kyosho Jets KYOA1300.)


ACCESSORIES
  THIS IS A .12 SIDE EXHAUST ENGINE WITH A PULL STARTER
INCLUDES: ASSEMBLED ENGINE, CARB, GLOW PLUG, AIR FILTER
REQUIRES: MUFFLER (EXHAUST SYSTEM DEPENDING ON VEHICLE), FUEL W/18% LUBRICANT
          AND 10%-20% NITROMETHANE, STARTING EQUIPMENT IN CAR ACG