O.S. Engines, .30VG (P) w/21E Slide Carb EB Mods

Hobbies R Us

Click Here For Pricing & Stock Availability

OSMG2079     .30VG (P) w/21E Slide Carb EB Mods

TECH NOTES

This is the O.S. Max 30VG EB Modified RC Monster Truck Engine
with Slide Valve Carburetor and Rear Exhaust.
Hand assembled and balanced and blueprinted to guarantee
precision parts fit, longest engine life and best possible performance.

***This engine does not have the O.S. Max 2 Year Warranty.***
For all set-up questions and engine service contact-
EB MODS
Ed Bridges
572 E. Main St.
Larksville, PA 18651
Shop Phone: (570) 719-1012
Fax: (570) 719-1007

FEATURES: Lightened and silicone filled crankshaft improves fuel delivery and
while maintaining counterbalance weight
Crankshaft is balanced using bob weights for a .2 IPS level or better
Crankshaft face is modified to improve aerodynamics, fuel atomizing
and balance
Lightened and strengthened connecting rod for reduced rotating and
reciprocating weight
Lightened and modified piston for reduced reciprocating weight and
improved fuel flow
Cylinder sleeve is ported to increase port velocity while
maintaining proper port angles
Piston and sleeve is matched to increase cylinder sealing area
and improved power and engine life

INCLUDES: O.S. Max 30VG RC Vehicle Engine with 21E slide valve carburetor,
#8 glow plug, carb gasket and instruction manual, Super 203 air
cleaner with two foam elements (OSMG2360), exhaust gasket and
illustrated instruction manual

REQUIRES: Fuel: Car blend fuel with 30% nitromethane content

SPECS:    Specs such as bore, stroke, RPM and power output are not provided,
contact EB MODS for more info.

Weight w/o Muffler: 12.5oz (355g)
Distance Between Mounting Holes Same Side: 0.83" (21mm)
Distance Between Mounting Holes Opposite Side: 1.4" (37mm)
Distance Between Mounting Holes Diagonal: 2.3" (59mm)
Height Bottom of Mounting Ears to Top of Cylinder Head: 3.8" (97.7mm)
Width of Mounting Ears: 1.8" (45mm)
Width of Crankcase Below Mounting Ears: 1.2" (30.8mm)
Distance from Front Bearing to End of Crankshaft: 1.2" (29.5mm)
Distance from Center of Engine to Front Bearing: 1.7" (44mm)
Distance from Center of Engine to Backplate: 0.85" (21.6mm)

COMMENTS: To use this engine on the Duratrax Warhead use OFNG0098 Clutch Nut.

ACCESSORIES

THIS IS THE O.S. MAX .30 VG EB MODIFIED MONSTER TRUCK ENGINE.
FEATURES: LIGHTENED & BALANCED CRANKSHAFT, PORTED CYLINDER SLEEVE, 21E SLIDE
VALVE CARBURETOR, MATCHED CYLINDER & PISTON, AIR FILTER ASSEMBLY #8 GLOW PLUG
LIGHTENED & STRENGTHENED CON ROD, SAME MOUNTING DIMENSIONS AS .21 SIZE ENGINES
REQUIRES: 30% NITRO FUEL, TRACK EQUIPMENT