O.S. Engines, .32 SX-H Heli Engine Ringed #20C Carb

Hobbies R Us

OSMG1941      .32 SX-H Heli Engine Ringed #20C Carb

TECH NOTES

This is the O.S. Max .32SX-H Ringed Helicopter Engine.

FEATURES: ABN cylinder and piston construction "A"luminum piston with "B"rass
cylinder liner that is "N"ickel plated
Larger bore #20C carburetor
Two year limited warranty

INCLUDES: O.S. Max .32 SX-H Helicopter Engine with 20C carburetor, extra
throttle lever, #8 glow plug and instruction manual

SPECS:    Displacement: .319 cu.in. (5.23cc)
Bore:         .768" (19.5mm)
Stroke:       .689" (17.5mm)
RPM Range:  2,000-21,000 RPM
Output:      1.15 ps / 17,000 RPM
Weight:     13.66oz (387g)

Distance Between Mounting Holes Same Side: 0.59" (15mm)
Distance Between Mounting Holes Opposite Side: 1.49" (38mm)
Width Between Mounting Tabs: 1.8" (45mm)
Height/Bottom of Mounting Tabs/Top of Cylinder Head: 2.4" (60.6mm)
Height/Bottom of Crankcase to Top of Cylinder Head: 2.9" (76mm)
Bottom of Mounting Tabs to Bottom of Crankcase: 0.60" (15.3mm)
Bottom of Mounting Tabs to Center of Exhaust Outlet: 1.2" (30.5mm)
Length from Backplate to End of Crankshaft: 3.7" (94.5mm)
Length of Cylinder Head: 2.1" (53mm)
Width of Cylinder Head: 1.6" (42mm)
Distance Between Center of Exhaust Mounting Holes: 1.4" (35mm)

REQUIRES: Fuel:10%-30% nitromethane and 18% minimum oil content, CATP9116
Muffler: Depending on application

COMMENTS: OSMG5506 Drive Washer is optional and not included with this engine.

ACCESSORIES

THIS IS THE O.S. MAX SX-H RING HELICOPTER ENGINE WITHOUT PULL STARTER.
FEATURES: ABC LINER & PISTON CONSTRUCTION, 20C CARBURETOR, #8 GLOW PLUG
REQUIRES: FUEL, 10%-30% NITROMETHANE AND 18% MINIMUM OIL CONTENT, MUFFLER AND
STARTING EQUIPMENT DEPENDING ON APPLICATION