OSMG2616   O.S.   Muffler Extension #843

TECH NOTES
   This Muffler Extension is a 11/16" spacer that installs between the muffler
 and the exhaust port on the side of the cylinder head. This results in the
 muffler being farther out from the cowl of the plane. One might elect to use
 one of the muffler extensions to keep the fuel residue farther out from a
 prized paint job or if the aircraft has a large cowl and the muffler isn't far
 enough away from the outside of the cowl.

This fits the:  .35FP,       .40FP,
                .35FP-S,     .40FP-S

INCLUDES: One 11/16"(17.5) Muffler Extension for #843, #E3030, & #762S muffler.
          Two 3 x 50mm screws (OSMG-6950)

SPECS:    Length (between engine and muffler): 11/16" (18mm)
          Width (side to side): 1-11/16" (41mm)