PAAPT18   Pacer   Z-Ends Nozzle (10)

TECH NOTES
  This is a Container of 10 Z-Ends Glue Nozzle Extenders by Pacer Technology.

FEATURES: Z-Ends extend the length of ZAP bottle nozzles for getting into
            hard-to-reach areas.
          Use for more precise control of glue placement and glue amount.
          Since Z-Ends are replaceable, a clogged or damaged glue tip doesn't
            mean tossing out the bottle and wasting glue.
          Fits over the standard bottle ends of all Zap glues.
          Z-Ends can be cut back to deposit larger amounts of glue.
          Sometimes glue can build up on the outside of a Z-End, let it harden
            and it will pop right off leaving a clean open tip.
          The Micro-Dropper tubing is used to deposit very small amounts of
            glue to the smallest of areas.
          The tubing fits into the opening of either the standard bottle or
            Z-End.
          The tubing comes standard at 12" long but can be cut as needed to
            suit your needs.
          The container they come in is reusable for around-the-house odds and
            ends, as well as around the garage.

INCLUDES: 10 Z-End Extenders Tips
          12" of Micro-Dropper Tubing

|  Homepage  |  Plastic Models  |   R/C Airplanes  |  R/C Boats  |  R/C Cars  |  Wooden Ships  |  Search  |