|
ProBoat |
Hobbies R Us |
ProBoat |
|
|
PRB2950 Miss Elam 1/8 Hydro RTR
Key Features
Fully licensed scale version of the Miss Elam Hydro
High-performance Zenoah® G-26M gas engine and water-cooled tuned exhaust
Centrifugal clutch and water pump let the Miss Elam idle safely without
overheating
Stainless steel running hardware
Factory-painted fiberglass composite hydro hull
JR® XR3i 3-channel FM radio system installed
Overview
The Pro Boat™ Miss Elam 1/8-Scale Gas Unlimited Hydroplane is nothing short of
the ultimate big-scale, ready-to-run RC boating experience. It’s an authentic
replica of the 2005 ABRA world champion hydro driven by the winningest
competitor in hydro boat racing history, Dave Villwock.
The sleek, 3’ 8” fiberglass hull comes out of the box assembled and factory-painted in authentic Miss Elam colors with everything installed. Its potent, water-cooled Zenoah® G26M marine engine is equipped with a high-performance tuned exhaust system that can have you screaming across the water at speeds in excess of 35 mph, while the unique water pump/clutch design allows the engine to stay cool, whether idling or at full throttle. JR’s XR3i programmable FM radio system is included for smooth, precise control.
Just add the batteries and gas (sold separately) and you’re ready to go. For
big-time boating fun that’s a cinch to get into, nothing else comes close.
For the most up to the minute information about the ABRA World Champion and world speed record holder Miss Elam team, visit http://www.u16hydro.com/
Specs
Length:45.25 in (1131.1 mm)
Beam:23.75 in (593.8 mm)
Engine Size:Zenoah G26M Marine Engine (installed)
Speed:+35 MPH
Radio:JR XR3i FM 75mHz (installed)
Hull Material:Fiberglass Composite
Trim Scheme Colors:Modeled after the full scale 2005 Champion!
Hull Type:Hydroplane
Needed to Complete
12AA Batteries (8 for the transmitter & 4 for the receiver)
Zenoah 2-cycle oil
Fuel Pump (HAN155) (be sure the pump you use is rated for gasoline)
Gasoline (+87 Octane), ethanol-free
Flex Shaft lubrication (PRA7145)
CA or epoxy glue (used to build included boat stand)
Fuel container (for gasoline oil mixture)
| Homepage | R/c Boats | Accessories | Cables | Chargers | Speed Controls | Engines | Props | Radio's | Search |