TAM56502   Tamiya   Semi Trailer Light Set 301 

TECH NOTES
   This is a Hop-Up Light Kit for the Tamiya Semi-Trailer (#TAM56302) that is
              used with the Tamiya King Hauler (#TAM56301).

FEATURES: These lights are for brake lights (one left and one right) and
            turn signal (or "blinker") lights (one left and one right).  The
            bulbs are clear and are installed behind the brake and turn signal
            lenses (just like a real car/truck).

INCLUDES: One Light Set: Brake and blinker lights, light cable (that runs the
            length of the trailer) and plug (to plug into connector cable).
          One Connector Cable: Connects the light set to the circuitry board on
            the tractor (the circuitry board is included in the tractor
            light set).
          One Rubber Bushing: To protect the light cable where it passes
            through the front of the trailer.
          One Plastic Bushing: To protect the light wires where they pass
            through the floor of the trailer to the rear bumper.
          Two Nuts(2mm), two Bolts(2x15mm) and Two Washers(2mm): For mounting
            the plug receptacle in the tractor body.
          One Double-Sided Tape
          One Illustrated instructions

REQUIRES: This light set is powered by the 6-cell motor battery in the tractor.
          Must use the Tractor Lights (TAMC0651) also to make functional.

|  Return To On-Road Electric R/C Cars |  General Hobby Catalog  |